Hey there,
We saw your post and we wanted to lend a hand!
If your looking to revert your Meta Quest headset to a past update there wouldn't be an option for that, but there is a different solution to the issue your having. The solution would be to update your headset to version v.81 via the Public Test Channel (PTC) and we will leave the steps for that below:
- Open the Meta Quest Link app on your PC device.
- Navigate to the Settings menu.
- Select the Beta tab from the settings options.
- Locate the Public Test Channel toggle switch.
- Toggle the switch to the on position to enable receiving future Public Test Channel releases.
To Verify you have successfully updated to our Public Test Channel:
- Once you have toggled the Public Test Channel toggle, you should be prompted to update your Meta Horizon PC App
- If no prompt is shown, go to Library > Select the Updates tab and check for a pending update notification
- To ensure you are on the correct version select the General tab and scroll down to the bottom of the page. You will see “Meta Quest Link App Version 81.X.X.XXX.XXX (81.0.0.930.254)
- Once v81 is fully released you may opt out of PTC, by going through steps 1-5 again, this time toggling off the “Public Test Channel” toggle.
We hope this helped!
