Forum Discussion
How to configure when using 2 SLI cards?
I run 4 monitors (2x2) on 2 SLI cards currently. I unplugged the top-right one and plugged the DVI cable into the Rift control Box. The question is, how do I configure Windows where I can still use my 3 other monitors and use the Rift for 3D Stereo testing?
I have tried doing the "Duplicate" option listed in the manual but Windows forces me to duplicate the main display to BOTH monitors 3 (LED) & 4 (RIFT). It leaves monitor 2 alone but messes up 3. It also causes problems with the display sending windows pop-ups to the RIFT where they are about impossible to see or manipulate.
Thoughts?
I have tried doing the "Duplicate" option listed in the manual but Windows forces me to duplicate the main display to BOTH monitors 3 (LED) & 4 (RIFT). It leaves monitor 2 alone but messes up 3. It also causes problems with the display sending windows pop-ups to the RIFT where they are about impossible to see or manipulate.
Thoughts?
12 Replies
- I thought triple buffering increases latency unconditionally by at least one frame.
- Earch grapich card usualy only manages to run 2 "synchronized clock signals".
That means DVI or HDMI.
I assume you are currently running 2x2 at DVI meaning that if you connect Oculus as an HDMI device you must disable one of your DVI devices or switch to Display port. Displayport is not affected by this.
