cancel
Showing results for 
Search instead for 
Did you mean: 

How do we adjust the IPD in our DK2 now that oculus config is gone?

Lhun
Explorer
Seriously - I love oculus home, but some of us still have our dk2s and will continue to have them after we get our CV1's. Not being able to adjust ipd makes it painful to look at things up close unless you're close to the median, which I'm not. 
24 REPLIES 24

oAmadeuso
Honored Guest
Hang on a minute, i'm still trying to get 1.3 installed so can't check for myself but is it true DK2 users can no longer adjust IPD?
That's insane and could lead to eye problems / headaches.

Oculus I know the "It's a dev unit" line absolves you from any support or liability but come on this is not one. Not everyone has the funds to buy the CV1 at launch.

Does anyone at least know what the "default" IPD setting is?

3DByte
Explorer
If I am not wrong the default IPD should be 64mm.

tozz3r
Explorer
Wow, I was playing around with the config setting for ipd and my DK2...I set it to 0.064. If that's how it feels like to have the wrong setting, I feel bad for people outside the range that Oculus can adjust. It was unusable! I feel thankful that I have a pretty standard ipd. It will be interesting with CV1 and to be able to adjust it directly.

2EyeGuy
Adventurer
AFAIK the only thing the IPD setting did was change the scale of the virtual world. Which is important, but it's not the kind of issues people are suggesting.

kojack
MVP
MVP
I believe there's two aspects it changes (IIRC):
- The separation of the cameras in the 3d world. This will affect scale of the world, if it's not matching you in real life then things will feel too big or too small.
- The skew of the projection matrix, used to align the infinite distance centre point of each view on the lens with the location of your eyes in real life. This would cause discomfort if wrong.

At least I think the second one is a real thing and I'm not imagining it. I just woke up and am getting ready for work, I don't have time to go into my code to check how the sdk uses IPD. 🙂

Author: Oculus Monitor,  Auto Oculus Touch,  Forum Dark Mode, Phantom Touch Remover,  X-Plane Fixer
Hardware: Threadripper 1950x, MSI Gaming Trio 2080TI, Asrock X399 Taich
Headsets: Wrap 1200VR, DK1, DK2, CV1, Rift-S, GearVR, Go, Quest, Quest 2, Reverb G2

hellary
Protege
Is there any update on getting IPD settings back for the DK2? I've got a mini project I'd like to work on right now for use in the Rift but I'm not expecting my CV1 until May - would rather be able to use my DK2 in the meantime rather than it being a headache inducing paperweight.

Lhun
Explorer
The IPD IS very, very important, on both glasses, AND VR headsets, This is the lens separation for your eyes that fixes the focal depth. Get it wrong, and close up things and far away things will give you headaches. You'll never get proper "sharp" convergence on the green + inside oculus home. It was silly to take it out because DEVELOPERS might not have MANY cv1s to give to various people, and they may want to KEEP USING DK2s to test products on lower resolutions, or as a quick and dirty extra workstation, OR, as a lower DEMAND workstation. 

bad move to take it out.

Aeroflux
Explorer
If you're developing in Unity, you can manually change your IPD in OVRProfile.cs (line 161). This is strictly for developing purposes of course...it won't work for any IPD other than the one you set, so releasing a demo for DK2 users isn't possible using this method.

I've been trying to figure out how to access the IPD number pulled from OVRPlugin.cs, but I'm not that experienced in coding.

KNP54
Heroic Explorer
DK2 IPD Workaround:

  1. Exit Oculus Home
  2. Stop OVRService
  3. Edit the file C:\Users\<username>\AppData\Local\Oculus\NetServer.cfg
  4. On the line that says "DK2LensSeparationOverride": 0,
  5. Change 0 to your IPD (in meters: example for 63.8mm change to 0.0638)
  6. Save the file
  7. Start OVRService
  8. Profit!
PS: Remember to change it back to 0 when you receive your Rift CV1!
Specs: AMD Ryzen 9 5950X, Deepcool Castle EX 360, 32GB Corsair Dominator RGB 3600MHz, Asus ROG Strix X570-E Gaming, Asus ROG Strix 3080ti, Corsair HX1000, Western Digital SN850 M.2 NVMe 2TB, Samgung 850 EVO 500GB & 840 EVO 500GB in raid0, Seagate Ironwolf 10TB, Corsair 4000D Airflow, Acer Predator X34 3440x1440 @ 100Hz, Acer V287K 3840x2160@ 60Hz, Oculus Rift S, Oculus Quest 2 256GB.

hellary
Protege
That method doesn't work. That is for physical separation and not IPD. Using that will lead to migraines!

We need a proper way to adjust the IPD on the DK2. Oculus surely doesn't expect developers (and users) who are waiting their CV1s to simply stop developing or playing all VR for a couple of months?!

I had an event to attend on launch night and placed my order 12 hours after pre orders opened. I'm hoping my CV1 will arrive in May but what am I meant to do in the meantime?
Still need help?

Did this answer your question? If it didn’t, use our search to find other topics or create your own and other members of the community will help out.

If you need an agent to help with your Meta device, please contact our store support team here.

Having trouble with a Facebook or Instagram account? The best place to go for help with those accounts is the Facebook Help Center or the Instagram Help Center. This community can't help with those accounts.

Check out some popular posts here:

Getting Help from the Meta Quest Community

Tips and Tricks: Charging your Meta Quest Headset

Tips and Tricks: Help with Pairing your Meta Quest

Trouble With Facebook/Instagram Accounts?