Today I powered on the Quest 3, and my guardian floor boundary is fine, but the room setup/spatial data where it saves your walls/furniture is really warped. I don't have a screenshot/video but it's offset about half way into my play area forward, and rotated about 30 degrees into the ground. Also the right wall is in the middle pf my play space. Eve if i don't play any Mixed Reality games or PCVR the wall is right in the middle but low opacity so I can see it. Rebooting Quest 3 didn't fix the issue.
Hello @Gruntled! Thank you for reaching out to us regarding the Guardian set-up. We would love to help you adjust the boundaries. As listed below, we have provided those steps for you:
To switch boundary modes or redraw your boundaries:
Press / on your right touch controller to pull up your universal menu.
Hover over the clock on the left side of the universal menu. When Quick Settings appears, select it to open the Quick Settings panel.
Select Boundary.
Select Stationary or Roomscale, then follow the on-screen instructions to set up your boundary.
For more information on boundary setting, feel free to click here and read through for more information.
If you're the author of a thread, remember to mark a reply as the Accepted Solution to help others find answers!
Hi, to clarify, it wasn't the guardian that was messed up, the boundary was fine, it was the blocked objects for walls and furniture that was rotated forward. When I did clear the spatial data in the settings it cleared EVERYTHING and made me redraw the boundary again, and the PCVR game I was trying to play didn't request spatial data so I didn't bother setting it up again.
12-26-202301:12 PM - last edited on 12-26-202301:16 PM by FunkyTanuki
Hi again, @Gruntled! Here is a helpful article that provides more insight on spatial data if you happen to need it in the future. If you still need some assistance, please feel free to reach out to us!
If you're the author of a thread, remember to mark a reply as the Accepted Solution to help others find answers!
