So when I was getting on vr I notice the logo showed up and then went away and it kept doing that. I later on found out it was in a boot loop. first I went to the boot menu and botted the device that didn't work so I tried factory resetting it cause I'm not scared too and that still didn't work. So after that I sideloaded and that still wasn't working then I looked on the internet and found nothing so I made this post trying to get help.
This is a long shot. If you remove the inner faceplate [ 6 screws] it allows you access to the screws that hold the front plate of the headset. Once the front plate screws are removed the front plate unclips allowing you to get to the battery connector for the PCB, sounds complicated, but really isn't. Disconnect the battery and press and hold all the headset buttons for a minute to discharge any capacitors. Reconnect the battery and try to fire up the headset. Instructions linked only do steps 1-7
Four Rift CV1s, Quest 2, Quest 3, Lenovo Explorer WMR, GearVR
Still need help?
Did this answer your question? If it didn’t, use our search to find other topics or create your own and other members of the community will help out.
If you need an agent to help with your Meta device, please contact our store support team here.
Having trouble with a Facebook or Instagram account? The best place to go for help with those accounts is the Facebook Help Center or the Instagram Help Center. This community can't help with those accounts.
