Problem with USB 3.0 Oculus Rift S

[Joinmo]

I would like to share my problem with the Oculus Rift S, and its USB 3.0 connection.

I use a laptop to use Oculus Rift S, and when connected to the USB 3.0 connector, the headset starts working, but after 30+ minutes of working with the headset, the USB 3.0 connection itself disconnects all devices connected to the device (laptop). When disconnecting it says that DisplayPort is not connected. I first thought that the DisplayPort was the problem, but it's not the problem. The problem is with the USB 3.O connection, which works fine. But when I plug the Oculus Rift S into it, it starts what I described above.

My way to solve this problem:

I started checking other USB 3.0 connections on my laptop after finding the connection error, but it had almost no effect. When connecting to another USB 3.0 connection, the power indicator of the glasses did not appear, but when connecting to another socket, the indicator on the glasses started blinking orange. After that in the Meta Quest Link application I get a notification with a driver update for the socket. Before the driver update I went to the device manager and in the USB list where the USB socket from the glasses was connected the yellow warning light was on. After that I tried to update the drivers fixing the problem with the warning light. But the glasses did not start working after that. 

After that I decided to use additional cooling from deep cool, which allows you to connect more USB connectors. I decided to try to use these USB connectors, after which I had a comforting but not completely satisfying result. The glasses began to work any amount of time, but the controllers are stuck in one place, interaction with the controllers can be done, all the buttons respond, but when moving the controllers themselves, no results.

I believe that the problem is related to the USB 3.0 update of Meta Quest Link. Because all devices connected to USB on my laptop work fine.