10-18-2022 10:04 AM
Hello.
After attempting to use my Quest 2 after only a day of inactivity, I only saw a tracking error screen no matter what I tried. After failing to fix this issue, I decided to factory reset my Quest 2. This made the problem even worse, as it now only displays a black, back-lit screen after the Meta logo appears. The sound still works, but the controllers vibrate every second or so, seemingly trying to connect to the headset (and failing every time). The app allows me to cast what the headset sees on my phone, but the picture is only black there too. I know it is not a display issue, as I can see the volume slider, red dot when casting, and the power off menu when I shut down the headset fine, albeit with tracking issues.
Things I have tried:
Multiple factory resets,
Covering the proximity sensor,
Charging headset to full battery,
Playing in different lighting conditions,
Sideload updating with a full firmware zip file,
Attempting to enable developer mode (does not allow me to through the app, despite having a developer account),
Attempting to start an application like Oculus Move through the app,
Replacing controller batteries,
Cleaning cameras with microfiber cloth,
Waiting.
All of these have resulted in the same black screen with vibrating controllers that doesn't allow me to do anything besides change the volume. The Quest 2 is in nearly perfect condition, but I purchased it from WalMart about two years ago. I'm not sure if there is any service I can receive because of that.
Solved! Go to Solution.
03-27-2023 07:26 PM
I did actually end up fixing the headset a while ago, but the solution might not be what you're looking for. I ended up buying a cheap broken/for parts Quest 2 with a sun damaged screen. After some trial and error, I finally replaced the camera interface piece on my headset with the one from the other broken headset I bought. This fixed all of the issues, including the controllers vibrating, and I'm able to play my vr library again! A couple things: The issues could have just been caused by one camera or cable, but since I had no way of telling which one, I replaced the entire part. This part does NOT include the motherboard, screen, or battery. This is what the part looks like:
It's pretty much just a metal plate with the 4 cameras and their respective brackets and cables. I'm sure you can replace a single camera a lot more easily than replacing this entire piece like I did. Secondly, this thing was a bit of a doozy to work on. I wouldn't recommend it if you have little or no experience working with small electronics. Try your luck with Meta support first. If you do feel confident in your abilities and have the right tools though, iFixit has a good guide about disassembling the headset.
TLDR: Replaced all four cameras and that fixed the issues.
10-19-2022 08:04 AM
Hey @Misinputs! We see you're experiencing a black screen with your Quest 2 and appreciate you laying out all the troubleshooting steps you've attempted to try and get this resolved. We would like for you to enter a support ticket with us here and enter in all the details you've provided here so that we can have our specialist look into this further!
10-23-2022 07:58 PM
I am in the exact same situation as you, I have been trying to get my sons oculus fixed again all night and Im assuming followed the same google search path you did. I still cant get it going and not being able to get into developer mode now is frustrating. After restarting it a million times, a few of those times I was able to see the initial screen with the controllers for a second but then right back to black screen. I have been trying to update firmware through adb however if you do the update through the admin menu (hold volume UP and power) you can see the updates are failing because of the wrong version but no legitimate source seems to be available from meta. Im getting frustrated as Ive been at this for hours now with no progress.
10-23-2022 09:10 PM
11-09-2022 11:12 PM
The screen goes back right after the MetaQuest screen and the controller’s vibrate and then nothing. It is showing the unlock pattern on the phone for a second and then black screen on my phone and headset.
01-01-2023 01:39 PM
Did you ever find a solution to this? I’m having the exact same problem right now.
01-01-2023 01:56 PM
Unfortunately not.
01-01-2023 02:13 PM
So did it just die for good? Never used it again?
01-01-2023 02:26 PM
That was the case for me, as I haven't attempted to fix it anymore since over a month ago. I hope that's not the case for you though. Maybe you could attempt to get a replacement from support?
03-27-2023 06:28 PM
Hello Misinputs,
Did you fix it? or replaced it?
Thanks!
Did this answer your question? If it didn’t, use our search to find other topics or create your own and other members of the community will help out.
If you need an agent to help with your Meta device, please contact our store support team here.
Having trouble with a Facebook or Instagram account? The best place to go for help with those accounts is the Facebook Help Center or the Instagram Help Center. This community can't help with those accounts.
Check out some popular posts here:
Getting Help from the Meta Quest Community
Tips and Tricks: Charging your Meta Quest Headset