Quest 3 EU v62 Direct touch

[Miamitonio]

Hi there,

I was reading around about the experimental Direct Touch feature, however I cannot find it in the settings or experimental settings...

Anyone have an idea on what happened? Perhaps it was removed with the v62 update?

Thanks a lot

[MetaQuestSupport]

Hey there, @Miamitonio! Thanks for reaching out about Direct Touch. We know how helpful it is to swipe through content and grab and move panels as you would your physical phone or tablet, and we're happy to help!

You'll find the steps to turn Hand Tracking on and off in this article. For your convenience, we've also outlined the steps below:

1. Press the Meta symbol button. Pull up your universal menu.
2. Hover over the clock on the left side of the universal menu. When Quick Settings appears, select it to open the Quick Settings panel.
3. Select Settings in the top-right corner.
4. Select Device from the left menu, then select Hands and Controllers.
5. Select the toggle next to Hand Tracking to turn it on or off.

Once this setting is on, your headset will automatically switch between using your hands or controllers if you put your controllers down or pick them up. 

We hope this helps! Please let us know if there is any additional information we can provide.

[MetaQuestSupport]

Hey again! We're just circling back to check in and see if we were able to get hand tracking going. Please feel free to reach out if there is any additional support we can provide!

[Miamitonio · Accepted solution]

Hi there! 

Well what I was looking was not the hand tracking but the direct touch. 
Anyway I found the answer I was looking for 🙂 

Thanks for the support.

[MetaQuestSupport]

Thank you so much for working with us to get this resolved! We're always happy to help, and please reach out again if you have any further questions or concerns!