12-16-2023 09:07 PM
Can any other quest 3 users please confirm for me (because tech support can not because they don't own one) if you have a fully charged Meta quest 3 and you use it while it is still connected to power should the charge be going down ??? Or did I get a dud....
Solved! Go to Solution.
12-20-2023 08:22 AM
Hello everyone! We appreciate you letting us know about this issue. We understand the frustration of not being able to use your headset while it's charging. We recommend that each of you share your feedback on the Quest headset. Here's a simple guide on how to do it! Rest assured, your concerns are of utmost importance to us, and we're here to assist you in any way we can!
12-16-2023 11:15 PM
i am having the same Issue
12-17-2023 04:50 AM
Same issue here. I played PCVR wireless, with the cable plugged into a wall socket and the battery still depleted.
12-17-2023 06:16 AM
I also noticed that the battery drains even though it is connected to the Quest3 included charger.
When I sniffer the USB-PD, it seems that Quest3 is requesting 5V instead of 9V for the voltage when it exceeds 60%.
The problem is that when the battery is low, Quest3 does not request 9V...
12-20-2023 08:22 AM
Hello everyone! We appreciate you letting us know about this issue. We understand the frustration of not being able to use your headset while it's charging. We recommend that each of you share your feedback on the Quest headset. Here's a simple guide on how to do it! Rest assured, your concerns are of utmost importance to us, and we're here to assist you in any way we can!
12-20-2023 09:13 AM - edited 12-20-2023 09:16 AM
Yes it is normal for the Quests battery to deplete if you charge whilst using it, but it should deplete at a much slower rate.
There are two possible reasons I can think of:-
1. The Quest consumes power faster than the charger/cable can supply it.
2. (most likely reason) Fast charging creates a lot of heat. The Quest's Snapdragon processor also creates a lot of heat when it's working hard. Therefore, it probably charges at a reduced rate whilst being used to prevent overheating.
06-24-2024 07:24 AM
I have the same problem. Meta2 was fine for watching movies for hours with power injected link cable while the Meta3 is done after 1.5 HRS of watching Prime. I use 45W power brick with INIU Oculus Link Cable with Charging. Is there any fix in the works for firmware update? Meta2 was much better in this department. This is very frustrating almost deal breaker.
Please let me know. Thank you.
Did this answer your question? If it didn’t, use our search to find other topics or create your own and other members of the community will help out.
If you need an agent to help with your Meta device, please contact our store support team here.
Having trouble with a Facebook or Instagram account? The best place to go for help with those accounts is the Facebook Help Center or the Instagram Help Center. This community can't help with those accounts.
Check out some popular posts here:
Getting Help from the Meta Quest Community
Tips and Tricks: Charging your Meta Quest Headset