02-07-202412:44 PM - last edited on 04-23-202410:21 AM by TheLegend27
v62 has a big problem with USB port sensor (found the very same issue on my Q3 and the one of my wife)... when used with an extension cable (even if it is a quality cable) from time to time star showing the debris-water warning message. Of course there is no debris or water, just a nasty software false alarm.
I had usb-c to usb-c connected to the gpu port (the only one that have enough power to let the vr powered to 80% for more then 4 hours).
After v62 I had 4 5 times the issue, tried to connect to motherboard port and never had any issue... The only thing is that after a 3 4 hours of run battery reach 45%, so before to start another run for next day I have to connect id with charger. So in my opinio the probel is with amount of power vr is reaching. Try to uuse different usb port (with less powerR.
I had this warning occur after the headset had been left sitting UNTOUCHED FOR SEVERAL DAYS. Very overzealous, very ridiculous. Even more ridiculous that I have to reboot the headset EVERY TIME this happens. Not only does the iPhone NOT require me reboot to re-enable charging (plus its liquid detection system also WORKS), but there is also the option to override it.
At this stage, being able to override the warning would be the best solution imo, given the high rate of false-positives.
bad news, error appears 2 minutes into my testing session @Lemonhead401@docaranzat guys are you in PTC v63 or just in V63? @TheLegend27 you really couldn't push this fix into the update??
Did this answer your question? If it didn’t, use our search to find other topics or create your own and other members of the community will help out.
If you need an agent to help with your Meta device, please contact our store support team here.
Having trouble with a Facebook or Instagram account? The best place to go for help with those accounts is the Facebook Help Center or the Instagram Help Center. This community can't help with those accounts.
