cancel
Showing results for 
Search instead for 
Did you mean: 

Right Meta Quest Pro controller will not track or connect properly

Lotion2011
Honored Guest

My meta right meta quest pro controller just blinks blue, and sometimes is a solid white or blinking white light. I have paired and unaired multiple times, and that works just fine. But it just never shows up on the screen and says it’s not connected? Please help me fix this.

4 REPLIES 4

MetaQuestSupport
Community Manager
Community Manager

Hiya there @Lotion2011! We couldn't help but notice that you are having issues with your Quest Pro controller tracking. We'd be more than happy to lend you a hand with this. If you are having trouble with pairing or controller tracking, please try the following: 

 

  • Try waking them up by quickly pressing the Oculus or Menu buttons.
    • The LED should be solid white on each controller while in VR
  • Make sure the tracking cameras of the controllers are clean
  • While in VR, hold the controllers at eye level, pointing in front so that the cameras on the controller can see the surroundings.
  • Try pressing and holding the Oculus button for 5 to 10 seconds. If the controllers re-center, then at least the controller Bluetooth is connected. This means it’s likely the controller is not tracking.
    • Try rebooting the controller by holding down the Oculus/Menu button until you see the lights change.
      • This usually takes about 12 seconds. You should feel the "powering down" haptics, followed by the "powering up" haptics before releasing the button.
    • If still not working, restart the HMD via long-pressing the power button until the Power Menu comes up. Use the Gaze Cursor to select Reboot.
  • Go through the Meta Quest app and unpair/pair the controllers.
  • If that does not work, manually pair the controller using commands:
    • To enter pairing mode on each controller, press and hold the Oculus+B (right) or Menu+Y buttons (left) for 3 seconds. You'll feel a light vibration from the front trigger when the controller transitions into pairing mode.

We hope this helps. If you continue to have issues, please reach back out. We'd be happy to provide you with additional troubleshooting. We hope to hear from you soon! 

If you're the author of a thread, remember to mark a reply as the Accepted Solution to help others find answers!

MetaQuestSupport
Community Manager
Community Manager

Hiya there! Just swinging by to see if you still needed help with your controller tracking. Hit us up anytime if you still need our help. We hope to hear from you soon! 

If you're the author of a thread, remember to mark a reply as the Accepted Solution to help others find answers!

hakangulerce.2024
Honored Guest

Hello, I am having the same problem, after 1-2 minutes my right controller stops working. I tried everything including factory settings, pairing/unpairing and did not work. Please help!

Hey there, @hakangulerce.2024! We see you are communicating with us via PM, and we'll be happy to assist you there! 

If you're the author of a thread, remember to mark a reply as the Accepted Solution to help others find answers!
Still need help?

Did this answer your question? If it didn’t, use our search to find other topics or create your own and other members of the community will help out.

If you need an agent to help with your Meta device, please contact our store support team here.

Having trouble with a Facebook or Instagram account? The best place to go for help with those accounts is the Facebook Help Center or the Instagram Help Center. This community can't help with those accounts.

Check out some popular posts here:

Getting Help from the Meta Quest Community

Tips and Tricks: Charging your Meta Quest Headset

Tips and Tricks: Help with Pairing your Meta Quest

Trouble With Facebook/Instagram Accounts?