Oculus Medium Import Fail

[Anonymous]

Hello Guys,

I have an .STL-File from SolidEdge which i would like to look at in the VR-Realm. So I converted these File into an OBJ-File. Then I put this File in the Folder for Medium Import. (....\_impor\stamps). But in Oculus Medium I've got everytime an error report wenn I'll import the files. I have a picture. (sorry its in german. it means: "Import for: <File Name> failed. Fail by loading the Format Templet Mesh: xanadu #<File Name>.obj )

[MattHickman]

Could you zip and upload the STL and the OBJ for us to investigate? 

[johnboyjr]

http://richwhitehouse.com/index.php?content=inc_projects.php use that to conver

[Anonymous]

MattHickman said:

Could you zip and upload the STL and the OBJ for us to investigate? 

yes of course.

thanks 

[Anonymous]

johnboyjr said:

http://richwhitehouse.com/index.php?content=inc_projects.php use that to conver

i will take a look @ it ,

thank you

[P3nT4gR4m]

If you just want to see your stuff in VR, I'd suggest Unreal Engine 4 as an alternative, since you won't lose as much detail on import. It's free to download, pretty easy to set up and runs VR like a ninja. 

[Anonymous]

P3nT4gR4m said:

If you just want to see your stuff in VR, I'd suggest Unreal Engine 4 as an alternative, since you won't lose as much detail on import. It's free to download, pretty easy to set up and runs VR like a ninja. 

ok thanks. do you know if its possible that i can built a another model with the imported stl-file and give it than back to print it with a 3D-printer?

[Anonymous]

SadikuA said:

P3nT4gR4m said:

If you just want to see your stuff in VR, I'd suggest Unreal Engine 4 as an alternative, since you won't lose as much detail on import. It's free to download, pretty easy to set up and runs VR like a ninja. 

ok thanks. do you know if its possible that i can built a another model with the imported stl-file and give it than back to print it with a 3D-printer?

yes you can export .obj files from Medium. If you need a .stl file then just use MeshLab to convert it from a .obj to .stl 🙂

[Anonymous]

johnboyjr said:

http://richwhitehouse.com/index.php?content=inc_projects.php use that to conver

When I'm loading the STL into Noesis I'm getting this error: "This file cannot be previewed"
It says "Export Complete" but I've got no new file.

[johnboyjr]

SadikuA said:

johnboyjr said:

http://richwhitehouse.com/index.php?content=inc_projects.php use that to conver

When I'm loading the STL into Noesis I'm getting this error: "This file cannot be previewed"
It says "Export Complete" but I've got no new file.

Can you send me the file