Please release a version of the elite battery strap where we can simply
use the port of the strap to plug in the oculus link cable! This way we
donâ€™t need to unplug the battery strap and leave the short cable
hanging on the side and the Overall exp...
Please add software ipd adjust on top of the hardware solution to
improve quality (stereo effect and chromatic aberration) for people that
fall in between or slightly out of the 58/63/68mm of the hardware iPd
adjustment. This way we would get a good ...
Hey there before ue4 4.24 we could use oculus touch inputs with the
motion controller nodes, but those are no longer available in 4.24
because they are deprecated on the oculus SDK Page there is still the
old way to implement them, does anyone kn...
On Oculus go you get the prompt if you connect the hmd to a pc if you
want to allow the access to data etc. and you have the option to toggle
a box that will remember your decision. On quest auch a box would be
great to, as it is right now you have t...
I am using the touch pro on quest pro and quest 3, work without a
problem (you just have to beware of the led strips, but that’s the
case with all controllers that are tracking themself or are tracked by
second this, really huge mistake for standalone projects I found the
4.27 version from meta to be good enough, but I just worked on a project
for pcvr using a quest pro (which is supported by this engine version)
and we always had a block corner vi...
they work well for my clients an me, in-house we also stress-tested them
using beat saber and there we only missed around 1/10 of the notes
compared to q2 controller. Its annoying that some people seem to have
problems with them, but then again, almo...
I had the same problem and switched for steamvr games like half life
alyx over to virtual desktop, on airlink it was unplayable and now it
runs extremely smooth! i tried every available settings in the oculus
software and in oculus debug tool but not...