I set up my sensors exactly to the recommended 360 degree, 3 sensor
setup dimensions. I originally had closer to a 8x15 area, but had a lot
of tracking issues. I set up an 8x8 area even though this means my
corner style desk isn't in the playspace. T...
I've been screwing around with my sensors a lot to try and get past the
issue where my touch controller randomly drifts. When I'm in the setup
screen I often get the 8609 warning. Sometimes it will just go away if I
unplug and plug my sensors back in...
I'm having issues with tracking, especially with my touch controller on
the right side. If I'm playing a game and aim to 2 to 5 o'clock my hand
can appear to drift around. Usually it's just at 5 o'clock, but today it
bugged out at 2 o'clock. It made ...
I wonder if there is a way to make the guardian system warn you a little
sooner when you're near a wall. I've found that I can stand close enough
to a wall, without the system kicking in, and still reach out and touch
my wall. My wall does light up a...
Before I got my Touch, I did some research into extension cables for the
Rift. Here's an exact list of what I ended up working for me. I found
one post where somebody used HTC Vive's Link box. It's just a little
powered HDMI/USB extension box. I actu...
3 Sensor setup. About an 8x8 square. Sensor 1 - No extension cable.
Plugged into Inateck PCI-e cardSensor 2 - Monoprice USB Active
extension. Inateck PCI-e cardSensor 3 - Active USB 2,0 cable included
with sensor. Plugged into USB 2.0 portHMD - USB a...
I ran the setup again to see if that fixed anything. Still broken. It's
definitely worse than before. My VR hands used to just jump 6 inches.
They'll still do that, but now every once in a while they'll fly several
feet away and pop back. That's just...
The update didn't fix my issues either. I'm pretty much having the same
issues that are in the video. It even feels a little worse. Before it
was most noticeable when I slowly turned and tracking moved from one
sensor to another and when I tried to h...
I thought I had a setup that worked pretty well. 3 sensor setup, about 8
ft apart, USB PCI-e card. Until today, I never had an issue with the
height level changing. Every once in a while one of my sensors seems to
shut off by itself. Whenever I reboo...
I took a break and when I came back I had a Windows update waiting for
me. I rebooted and noticed one of my sensors didn't reconnect. The light
was out and it didn't appear in the Device Settings. I remembered
somebody else on here saying their USB P...