Hi guys,my eyes are still good enough, but, like usually happens if you
are over 50, I'm far-sighted and need glasses for reading.Using Oculus,
I can't say that my view is blurry, but I'm wondering if it could be
better using lens.So I'm going to pri...
Hi, after using my Oculus Rift without any problems for about 1 hour, I
took a break (30 minutes).When I put it on again,I had black screen. No
sign of life. I went to Oculus config panel and realized my Rift was not
connected.I tried to set it up ag...
Hi, strange problem here.I got a second hand Rift. My system was not
totally compliant with requirements because of the Geforce GTX 770 ( the
rest was OK: i5. 8Gb RAM ecc.),Anyway it worked, with some stuttering
with demanding apps. Tired of stutteri...
Obvioulsy 3D printing is intended for the frame, and NOT for lenses.For
those who are familiar in 3D printing this is the link for the model of
the frame and the instructions by the maker.
https://www.thingiverse.com/thing:1602460
Hi,thank you so much for help.Well, if the focal length needed for
Oculus is about 1.5m, I'd say that I don't need lenses, as I actually
have no problems focusing at that distance. Probably some small ammount
of blurriness (compared to a standard PC ...
Hi guys, I can confirm it was a USB port issue.Rift was connected to an
add-on card USB 3 port. I connected it to a USB 3 port of the
motherboard, et voilà! problem solved.It seems that the bad USB port
does not give enough power to the Rift.Well, be...
Well, I tested my CV1 (and cable) on my friend's system and have been
very pleased to realize that my CV1 and its cable are both OK! I was
quite sure it was a faulty cable issue, but luckely it's not.Useless to
say I tried swapping ports and so on....
I gess it's a cable issue. Today I'm going to a friend of mine to test
my rift with his working cable.Warranty ended in october. I don't
understand why Oculus stopped distribution of spare cables, considering
they are so prone to fault. Probably they...
