quest 3 keeps turning off and on by itself repeatedly, but when back on, no controllers/hands work.
Quest 3 manufactured in December 2023 keeps turning off and on during use, usually after using a data cable either from my pc or from my piano's usb output (for midi which incidentally I can't get to transmit). Each time it comes back on, I'm presented with the pin screen, but I'm only able to move the pointer with my headset, not with my controllers or hand tracking. If I move my head more than 30 degrees I can no longer move the points, and if I press a button on the controller I can no longer move the controller, but repeatedly pressing the button on the controlller after I cant move the pointer, still causes the onscreen pointer dot to flash in response. A few seconds later it will turn off and then repeat the above process. Powering off the device and restarting it seems to allow it to work for a little while before it does it again. I'm not doing anything intensive in it, just meta workroom, and the first time it happened was in PianoVision. Battery is full charged. I've only had the unit 2 days. It's not overheating, because the first time it happened I'd only just turned it on. Strange thing is, since installing the meta remote desktop onto the PC, I experienced a similar issue with my PC when trying to take it out of sleep mode this morning. I think this might be coincidental though, because I wasn't using airlink when it first happened in PianoVision. Could the repeatedly going in and out of standby and the failure to receive midi be caused by a faulty usb-c socket on the quest 3?
Misaligned headset view position/ body tracking
I have a quest 3s and have had no issues for the last few days since I got it, but now my avatar in games is hunched over making it hard to see my hips or chest, and feeling like my view is from in front of my head instead of where my head is at. It also messed up my controller tracking/ perspective in pass through mode, since usually my hands and controllers would match up perfectly and the controllers would have a mixed reality effect to see battery life and a representation of my controllers in passthrough, making it hard to distinguish the two from reality to vr, but now the representation of my hands and controllers dont line up and are smaller than what I see. It's almost like everything seems a bit bigger in passthrough, but smaller in games. Long story short, can I reset the position of my body and head to line up with my own because this is making it hard to interact with holsters and causing bad arm and hand tracking in game apart from the jarring experience of seeing from a foot ahead of my nose
Quest 3 lost all tracking
Brand new quest 3 just arrived, configured an everything was doing pretty well. Was just logging into a game when all tracking just stopped working, a window saying "Tracking lost" showed up, but I couldn't click anything since the controllers stopped working too, hand tracking also wasnt working. I tried cleaning up the cameras with a very soft towel, tried rebooting, resetting to factory settings, everything I could. The screen is either completely black, black with a dot or on the starting screen asking to turn on the controllers, but the screen just moves randomly and isn't following the headset movements at all. There is a white dot blinking on the left controller and they keep vibrating every few seconds.
