Oculus lik recognize connection as USB 2.0
Good evening and happy new year! I'm using my oculus quest 2 with a "CableTex usb-c to usb-c 3.1 5m" but i'm not getting it recognized as a 3.0 but only as a usb 2 (at -+ 350Mbps). My motherboard is a "MSI MAG B550 tomahawk" (mounted i have a ryzen 9 3900x, 32 gb ram and an msi gaming x rtx 2060super); i'm getting the same result through all my usb C ports: -1 on the front (connected to the internal motherboard connector which is a 3.2 gen1 usb c) -1 on the rear io (direct from the motherboard which is a 3.2 gen2 usb c) -1 on the rear pci expansion card (it's a supageek pci expansion card, which theoretically from the amazon spec. is 3.0, although it says in the description that it is NOT compatible with oculus rift; anyway is working fine but recognize as usb 2 as the others) From Device Manager in windows 10 pro it says that my ports are 3.1/3.0 but i know that there are some misleading in the meaning of usb 3.x genX; so i think that windows is operating those ports just fine. I tried flipping the usb c cable the other side (even if it should be "specular" but i read that some time it works) and i tried like 10 other cables (usb-a to usb-c) that i had laying around (2 of them i know in fact being 3.1; the other were spares that could be 2.0) to different ports (rear and front ports, so all 3.2 gen1 5Gbps and 3.2 gen2 10Gbps); but the result were the same: recognize as USB 2, and working at "only" -+ 350Mbps. So i'm here to ask for assistance, the oculus link IS working but i can't activate 90hz mode because it recognize the connection as USB 2.0.
