Rayban meta GEN2 ISSUE with Playing WhatsApp Audio Message
I've two pair of RayBan meta gen2 "Headliner + Wayfarer", and few days ago the Headliner start the issue and today also the Wayfarer. Each is connected to a different phone with different setups, but now both RayBan, when asked to play the just received WhatsApp voice message, they are muted, like they are playing a mute message... It never happened before, all the audio commands and speakers works good on other applications... We reset both glasses, reconnect, ans troubleshooting but nothing changes... Anyone has the same issue?The speakers on Meta Glasses 2 are not working – I know the cause
Hi, after not using my Meta Ray-ban 2 Wayfarer 0298 for a while, I took them out of their case and updated the firmware. The speakers stopped working. I tried everything: restarting, hard reset, disconnecting, restarting my phone, re-pairing, but the glasses still behaved abnormally and occasionally the message "Speakers not working" popped up in the app. Then, by coincidence and a bit out of desperation, I restarted the glasses by holding down the shutter button while turning on the glasses and releasing the shutter button when the LED turned red. I left the glasses on the table and heard "battery ninety percent." I left the glasses on the table and tried to start Spotify. Suddenly, the glasses started playing. I assume that the new firmware is faulty and that the problem occurs when the user puts the glasses on their head. Is it realistic that someone will look into this? I had custom optical lenses made for the glasses for $500. Thank you for your help and response
Rayban MetaAI Glasses overheating when setting them up for the first time?
I bought brand new Rayban Gen2 Meta Ai glasses this weekend. My partner was setting the glasses up for the first time and within 5 mins of use the glasses overheated whilst he was doing so and connection completely stopped. Keep in mind we were inside our air conditioned home at night time. The battery went from 100% to 29% within minutes and kept draining whilst we had the glasses sitting under our air conditioning waiting for them to become usable. Do I need to send these back as faulty? They have never been used!
Meta Ray-Ban Gen 2 Glasses Not Powering On or Charging
Hello everyone, I recently purchased a pair of Meta Ray-Ban Gen 2 smart glasses (prescription lenses) from Walmart. However, I’m facing an issue where the glasses do not power on or charge, despite following all recommended steps. Here’s the situation: The charging case works correctly: when plugged in, the case shows the yellow LED indicating it’s charging. When I place the glasses in the case: No LED appears on the glasses. The case sometimes shows a red LED when open. I have tried: Using the original iPhone 20W wall charger Checking and cleaning the charging pins on both the case and glasses Ensuring the glasses sit properly in the case with magnets snapping in place Attempting the long reset method (pressing the side button for 20–25 seconds) Despite all this, the glasses remain unresponsive. Additional details: Glasses have prescription lenses installed. The box was sealed when purchased, so this is the first use. I’ve tried multiple cables and wall sockets. Power button on the glasses is the slide type, not press-and-hold. Issue Summary: The glasses appear completely dead, and it seems like either the battery is in a deep-dead state or there’s a hardware defect preventing charging/detection. The case itself is functioning normally. Has anyone experienced this issue with Meta Gen 2 glasses? Any suggestions or confirmed fixes would be greatly appreciated. Thank you!