my Meta quest 3 seems to have ZERO tracking?
I don't know why this started, but all off a sudden my headset started experiencing random times where the tracking would just "turn off", like no head movements or anything, and when the tracking menu appeared, the background was just pure black, like if the cameras were off or something, this was just something that would happen once every battery life it seemed, so I brushed it off. But not long ago it started happening more and more often. Now it's to the point where it never turns on, except once every couple headset boots, but it just goes back to its state after a couple of seconds. Currently I have it on the account select screen (since I have two accounts on my headset), and it's just stuck, I mean there's my accounts, and the white dot that points where your head is when no controllers are connected, and my controllers randomly just blink their little light to then vibrate a couple of seconds later. I've tried hard booting, no luck (except one time where it worked for a bit, but it seems my luck ran out). I've had another Q3 headset that had something similar problem, tracking would just turn off and turn on every ~3 seconds, it was unusable. So, anyone else had this problem, and had a solution? (Looking for answers that aren't "return it" or something similar). Thanks!
Quest 3 lost all tracking
Brand new quest 3 just arrived, configured an everything was doing pretty well. Was just logging into a game when all tracking just stopped working, a window saying "Tracking lost" showed up, but I couldn't click anything since the controllers stopped working too, hand tracking also wasnt working. I tried cleaning up the cameras with a very soft towel, tried rebooting, resetting to factory settings, everything I could. The screen is either completely black, black with a dot or on the starting screen asking to turn on the controllers, but the screen just moves randomly and isn't following the headset movements at all. There is a white dot blinking on the left controller and they keep vibrating every few seconds.
Quest 3 Controllers disconnecting at certain distance
I've been noticing lately that my hands will just suddenly become stiff if I stretch, grab something in VRChat or when I'm trying to grab something on a current model I'm wearing. Its becoming increasingly worrisome that I can't even grab things on certain models that you can actively grabbed Now I'm in a well lit room, my radius is lined by my room so plenty of space. I just don't know what it is, please someone help.
Quest 2 camera's not tracking properly?
My Quest 2 was working fine. I hadn't used it for a month or 2 and decided to boot it up. It would start up and seem normal for a few seconds. Then the camera tracking would float off and the image would freeze for a couple seconds. It would do this over and over. I thought a factory reset might solve the problem but now it just does the same thing while trying to load into the starting environment. It goes back and forth between freezing on the environment back to pass through loading into environment, tracking floats away, goes back to pass through, loads back into environment. Over and over. I have no way of accessing my menu to check tracking settings. I assume one of my cameras might have become faulty. I replaced a camera once roughly 2 years ago and it worked good as new. I think maybe its the same camera that became faulty. But I would like to like to figure out how I can know for sure. I don't want to end up replacing all 4 and have it still not working. Maybe it could be a firmware issue. I don't really know.Meta Quest 3 Stuck In Boot Loop and In Locked State
First of all my headsets lock state says locked, I was just booting up my meta quest 3 to play some gorilla tag(like always) and I was able to boot up the hedseat but the hedseat wasnt tracking properly, i was able to boot up gorilla tag before my hedseat fully shut down, when i tried to boot it up again it started a boot loop. Tried to shut it down using the USB something screen(idk the full name) and forcefully shut it down, boot it up again after 5 minutes, still a bootloop, reset the headset a few more times, boot loop stopped but i still couldnt boot it up, left it there, it booted up, couldnt do anything cause my headset wasnt tracking anything and cameras were just not working, since i couldnt do anything i shut it down, boot loop started again and i currently have the headset shut down, what should i do?
Quest 2 Controller Tracking Degradation
Hi everyone, I’m hoping for some input from experienced Quest 2 users before I make a final decision regarding controller replacement / moving away from meta by upgrading my headset. Over time, my right touch controller (and to a lesser extent the left) has developed noticeable tracking degradation. This wasn’t a sudden failure, it gradually became more apparent during gameplay, particularly in Beat Saber where consistent tracking is important for accuracy and fitness use. I’ve gone through extensive troubleshooting, including: Testing in multiple rooms (including a different property) Controlled lighting conditions (no direct sunlight, no reflective surfaces, no LED interference) Fresh batteries (multiple brands) Re-pairing controllers Cleaning headset cameras and controller rings Guardian reset Full factory reset Testing both standalone and via PCVR The issue persists across all environments. I’ve been in contact with support and understand that, as the device is out of warranty, replacement controllers would need to be purchased through the out-of-warranty program. Investing close to £100 in refurbished replacements, seems very risky and steep, I want to be absolutely certain there isn’t a less obvious cause I’ve overlooked, especially since the root cause hasn’t been conclusively identified as hardware failure. Has anyone experienced gradual tracking degradation like this and successfully resolved it without replacing hardware? I’m particularly interested in: Battery contact or movement issues Less obvious environmental interference Known long-term wear factors Any advanced diagnostics I can try I use my headset primarily for exercise, so reliability is important, but I’d prefer to rule out every possible factor before committing to replacement hardware. Appreciate any constructive suggestions — thank you in advance.
Meta Quest 3s lost tracking
I was going to play on my headset but when i booted it i got a error saying tracking is lost. I tried rebooting and everything plus got No Command error then it got fixed. Played on it for more than 10 minutes while playing it was lagging more than usual and got the same error. I have no idea what to do please help.