Skip to main content
dextius
Participant
April 6, 2013

UDK question

I have the UDK installed. When I run a map using the "start in pc" the rift head mount controls work fine, but the graphics displayed are not side by side.

I have my monitor configuration set to "duplicate" as that is the only way I can get TF2 and the Tuscany demo working. What extra option do I have to enable to try out Epic Citadel with the rift? (again, headtracking works, but the side by side video does not).
    This topic has been closed for replies.

    16 replies

    Show previous replies
    wthlee
    Up and Coming
    April 10, 2013
    "cybereality" wrote:
    You will have to use the "Launch on PC" option. Testing in the editor is not supported.

    You will also need the actual Rift headset connected in order to see the game in 3D, with warping, etc.


    so 3d will not work with my home made 7 inch hmd?

    because it says the stereo on command is not recognized
    cybereality
    Inspiring
    April 10, 2013
    Sorry about that. I believe those commands only become active if a Rift is detected.
    AMD Ryzen 7 1800X | MSI X370 Titanium | G.Skill 16GB DDR4 3200 | EVGA SuperNOVA 1000 | Corsair Hydro H110i Gigabyte RX Vega 64 x2 | Samsung 960 Evo M.2 500GB | Seagate FireCuda SSHD 2TB | Phanteks ENTHOO EVOLV
    wthlee
    Up and Coming
    April 10, 2013
    "cybereality" wrote:
    Sorry about that. I believe those commands only become active if a Rift is detected.

    that means i have to wait for my rift to arrive first before i can start with my projects .. the waiting for my rift is killing me.
    cybereality
    Inspiring
    April 10, 2013
    Well please feel free to start working on aspects of your project that don't require testing on the Rift.
    AMD Ryzen 7 1800X | MSI X370 Titanium | G.Skill 16GB DDR4 3200 | EVGA SuperNOVA 1000 | Corsair Hydro H110i Gigabyte RX Vega 64 x2 | Samsung 960 Evo M.2 500GB | Seagate FireCuda SSHD 2TB | Phanteks ENTHOO EVOLV
    XavierMidnight
    Participant
    April 14, 2013
    I had made a quick start vid for getting udk up and running in the rift
    http://www.youtube.com/watch?v=Ubepu6X0LfQ
    alextrep
    New Participant
    November 27, 2013
    How do you install the UDK? I dowloaded the 1,5Gb file and then extracted it but I don't know what to do next? There is the setup application but when I run it, here is what it tells me: "Same or higher version of .NET Framework 4 has already been installed on this computer." All I can do next is close the message window and nothing else happens... There is also the SetupUtility application and when I run it, it asks me for admin authorization but when I give it, nothing happens too...
    I don't know what I am doing wrong?
    Terms & ConditionsAccessibility statement