Skip to main content
New Participant
Nov 16, 2026 3:59 PM UTC

Have a Quest 3 or 3S? 5-minute test of a WebXR workspace (no install)

Hi everyone! I'm entering SpatialDesk in the Productivity track: a seated, hands-first workspace for Quest, built on Meta's Immersive Web SDK. It opens from a link in Meta Quest Browser, with no install and no account.

I don't own a headset, so it has only run in Meta's IWER emulator. Five minutes on a real Quest 3 or 3S before Wednesday's deadline would help me a lot.

Open in Meta Quest Browser: https://d2p3027seoreck.cloudfront.net/?fast
(?fast makes the 25-minute focus block last 25 seconds.)

  1. On the first page, press Speak once and allow the microphone (or skip it), then press Enter VR.
  2. Answer the three-question setup: where you sit, one pinch where your hand rests, and steady aim yes or no.
  3. Follow the three steps on the board: tap a card, drop it in Doing, press Focus 25. The plant on the desk should grow a leaf.
  4. Press Plan my day, then Apply. Then press Talk and say "bigger text", then "undo".

If you have one more minute:

Most useful to hear:

  • your headset, and whether you used hands or controllers;
  • anything that didn't respond, looked wrong or felt uncomfortable;
  • whether the text was easy to read;
  • roughly how smooth it felt.

Reply here, or with a link to your own project: I'm happy to return the favour by trying your web build in the emulator, or giving feedback on your video and Devpost page. Thank you!

    8 replies

    New Participant
    Nov 17, 2026 11:33 AM UTC

    Update: a "Use the example" link and one-press "bad day" requests now let you try it without typing or a microphone. Still looking for 5 minutes on a real Quest 3/3S before tomorrow's deadline.

    steve40
    Honored Contributor
    Nov 17, 2026 11:46 AM UTC

    The Command board on the left side obscures/overlaps the centre board (both in VR and MR mode) making it impossible to use. I stopped testing after that.

    EDIT: I restarted the app and now the position is better, no longer overlapping. BUT the timed gaze-controlled pointer selection mechanism is a problem. I can’t look directly at anything because the circular timer thingy wants to select anything I look at for more than a second! It was unpleasant/uncomfortable because it is right in my line of sight, and I wanted to look around without selecting anything.

    New Participant
    Nov 17, 2026 12:45 PM UTC

    Thank you, this is exactly the test I could not do without a headset. Both things are fixed in the live version.

    The console over the centre board: the app placed the space around your head a few frames after Enter VR, and on a real Quest the tracked pose can still be moving then. It now checks once more a second or two in and rearranges around where your head actually settled. Turning your head to look at the console never moves it.

    The gaze ring selecting everything: that is hands-free mode, which is meant to be on only when you ask for it. It turns on with the "without hands" link, or by resting your eyes on "No hands? Look here" in the setup. That took 2 seconds, too easy to trigger while reading. It now takes 3, and the notice says how to stop: say "hands free off" or press Hands-free on the console.

    If you have a minute: which link did you open? And if you try again, a fresh tab picks up the new version: https://d2p3027seoreck.cloudfront.net/?fast

    steve40
    Honored Contributor
    Nov 17, 2026 1:01 PM UTC

    What happened last time, is that when I entered MR mode, the panels spawned very large, so they overlapped. Then after a few seconds, the app quit unexpectedly. When I restarted the app, the panels spawned a smaller more comfortable size and were better positioned.

    I just tested again, and the panels spawned too large again (about 1m in length/width). The app quit unexpectedly after about 30 seconds again. However, when I cleared the Browser cache and restarted the app, the panels still spawned too large and overlapped. See screenshot (taken from VR mode):

    The panels were too large and too close to my face, it felt extremely claustrophobic.

    New Participant
    Nov 17, 2026 2:26 PM UTC

    Thank you again, the screenshot made it clear. The size comes from the setup's second step: it moves the space toward where you pinch, and it could bring the boards as close as 30 cm without making them any smaller. My instructions above said to pinch "where your hand rests", which made it worse. Sorry about that.

    That is fixed in the live version: a pinch brings the space at most 20% closer, and the panels shrink by the same amount, so they look the size they do by default.

    The quit after about 30 seconds I could not reproduce: in the emulator, memory stays flat over a minute. If you have a moment, three answers would help a lot. When it quits, do you land back on the browser page, or does the browser itself close? Any message? Were you in "In my room", and did you press "Fit room"? With no room scan available, Fit room asks the Quest to scan the room, which may take you out of the app. And did you use hands or controllers?

    Thanks for your time!

    steve40
    Honored Contributor
    Nov 17, 2026 3:16 PM UTC

    It quit back to the browser page. There was no message. I was in XR mode. I did not press “Fit room”. I already had my room scan set up. I used controllers to start the app, then switched to hands.