Skip to main content
cybereality
Inspiring
February 3, 2017

Rift 1.11 Release Notes

Features

  • You can now choose to skip updating the firmware on your controllers when repeating Oculus setup.

  • Improved visibility of Guardian System boundaries with better hand animations.

  • Improved instructions for Oculus sensor positioning during setup.


Bug-fixes

The following key user-facing issues have been addressed in the 1.11 release:

  • Improved experimental roomscale and experimental 360º support.

    • Fixed calibration issues for multi-sensor configurations and Guardian System setup.

    • Fixed tracking issues with Touch controllers that resulted in tracking judder or loss of hand location or hand orientation in VR.

    • Fixed sensor issue which prevented Touch controllers from being detected.

    • Fixed stability issues with floor height in VR.

  • Improved Guardian System.

    • Fixed stability issue with Guardian System boundaries moving when the Rift headset wasn’t in use.

    • Fixed tracking issue where Touch controllers weren’t detected by Guardian System.

    • Fixed reliability issue with Guardian System boundaries triggering too soon.

  • Improved Oculus Rift and Touch setup.

    • Fixed visibility issues with VR screen for adjusting Rift headset lens position.

  • Fixed search issue with Oculus Store and Oculus Library in the Oculus software.

    This topic has been closed for replies.

    164 replies

    Show previous replies
    cyberealityAuthor
    Inspiring
    February 4, 2017
    Of course, I'm always prepared.
    AMD Ryzen 7 1800X | MSI X370 Titanium | G.Skill 16GB DDR4 3200 | EVGA SuperNOVA 1000 | Corsair Hydro H110i Gigabyte RX Vega 64 x2 | Samsung 960 Evo M.2 500GB | Seagate FireCuda SSHD 2TB | Phanteks ENTHOO EVOLV
    elboffor
    Inspiring
    February 4, 2017

    cybereality origonally said:

    My body is ready.



    cybereality edited it to sa:

    Of course, I'm always prepared.

     I
    prefer the first response lol, but you were correct. anyone who hasnt seen it will soon see...


    This is my forum signature. There are many others like it, but this is mine.
    cyberealityAuthor
    Inspiring
    February 4, 2017
    LOL, my ninja edit clearly wasn't quick enough.
    AMD Ryzen 7 1800X | MSI X370 Titanium | G.Skill 16GB DDR4 3200 | EVGA SuperNOVA 1000 | Corsair Hydro H110i Gigabyte RX Vega 64 x2 | Samsung 960 Evo M.2 500GB | Seagate FireCuda SSHD 2TB | Phanteks ENTHOO EVOLV
    slartibartphast
    Participant
    February 4, 2017
    Bah no sound mirroring. 
    elboffor
    Inspiring
    February 4, 2017
    clearly ;)

    just tested it btw peeps, anyone hoping the 4 sensor bug was fixed I have news!!!!

    it isnt :(

    is it worth me raising a ticket for it cyber or are support alredy aware of it?
    This is my forum signature. There are many others like it, but this is mine.
    Mnem0nic
    Participant
    February 4, 2017


    Of course, I'm always prepared.



    I'm sure you are ;)

    Here's my latest log from the last 10hrs, I just made this log now but Rift was unplugged and put away,, If its needed to re-run log then I'll do it again..

    latest version 1.11  

    //  I did notice that tracking glitch/shift happens also in the "Guardian setup" window,, just by moving the controller around in here without tracing a line my 3 sensors would shift about and not stay still, slight movements etc,, I can pretty much know I'll have tracking issues even before reaching HOME at that point :(   
    samhimburg
    Participant
    February 4, 2017

    Mnem0nic said:



    Of course, I'm always prepared.



    I'm sure you are ;)

    Here's my latest log from the last 10hrs, I just made this log now but Rift was unplugged and put away,, If its needed to re-run log then I'll do it again..

    latest version 1.11  

    //  I did notice that tracking glitch/shift happens also in the "Guardian setup" window,, just by moving the controller around in here without tracing a line my 3 sensors would shift about and not stay still, slight movements etc,, I can pretty much know I'll have tracking issues even before reaching HOME at that point :(   


    Same thing happening for me.  Sensors are shifting around during guardian setup.  Once into home it seems that the hand movement and jitteriness is worse than before.  
    bgranorff
    Up and Coming
    February 4, 2017

    Mace404 said:

    Thanks for the release notes. Now for a way to manually update.
    I always get updates around 3 days later which is very frustrating - especially when wanting these fixes.


    And what about choosing the option to repair your installation? I am doing it now.. and I assume the 1.57GB that I am forcing my system to download will include the latest and greatest. 

    Crossing my fingers at least. 

    flexy123
    Inspiring
    February 4, 2017
    OH HELL YEAH, way more consistent now. Could calibrate my setup without issues. Previously this was a trial/error thing to get right.
    JesseDeya
    Participant
    February 4, 2017

    bgranorff said:


    Mace404 said:

    Thanks for the release notes. Now for a way to manually update.
    I always get updates around 3 days later which is very frustrating - especially when wanting these fixes.


    And what about choosing the option to repair your installation? I am doing it now.. and I assume the 1.57GB that I am forcing my system to download will include the latest and greatest. 

    Crossing my fingers at least. 





    It won't unless it by chance happens to roll out at the same time, I tried that yesterday.
    Show more replies
    Terms & ConditionsAccessibility statement