Compositor or NVIDIA driver bug when GPU is not busy enough (DK2, GTX750)
Reproducible with OculusRoomTiny (DX11), OculusWorldDemo (DX11)
I have a DK2 and an NVIDIA GTX750, which is lower than the recommended spec, but should be enough for development purposes, as I can control how much work I give to the GPU in my engine.
The issue is that if I don't give the GPU enough task, after some seconds, the Compositor GPU Time goes up gradually: First 1.7msec, after a second about 3msec then another sec later 5ms, and goes up to 11msec. Queue ahead also goes up to 10msec, and Missed V-sync count goes up continuously, as if every other V-Sync is missed. (In the first seconds there is no V-Sync miss)
I can fix it if I render the whole scene several times in OculusRoomTiny.
Oculus WorldDemo and Oculus Home works by default, because they give the GPU just enough work. But if I comment out the RenderEyeView() call in OculusWorlDemo, I experience the same problem. A simple Sleep() does not seem to work, I have to actually keep the GPU busy.
Everything worked fine with the 0.8 runtime.
The issue is either with the Oculus Runtime 1.3 or with the new NVidia driver (364.72). (And maybe only on DK2?)
Also, maybe related to this bug, ATW does not seem to work on my setup. When I have the above mentioned V-Sync miss every other frame, I get a kind-of ghost effect, as if two frames are blended together. It is worse than having normal judder I think.
While I intend to buy newer video card and a CV1 when I will have some money to spare, I would like to make progress with my development until then. So it would be cool to make this stuff work propery on my current setup. As a workaround, ,can I switch off ATW or dynamic queue ahead somehow?
I have a DK2 and an NVIDIA GTX750, which is lower than the recommended spec, but should be enough for development purposes, as I can control how much work I give to the GPU in my engine.
The issue is that if I don't give the GPU enough task, after some seconds, the Compositor GPU Time goes up gradually: First 1.7msec, after a second about 3msec then another sec later 5ms, and goes up to 11msec. Queue ahead also goes up to 10msec, and Missed V-sync count goes up continuously, as if every other V-Sync is missed. (In the first seconds there is no V-Sync miss)
I can fix it if I render the whole scene several times in OculusRoomTiny.
Oculus WorldDemo and Oculus Home works by default, because they give the GPU just enough work. But if I comment out the RenderEyeView() call in OculusWorlDemo, I experience the same problem. A simple Sleep() does not seem to work, I have to actually keep the GPU busy.
Everything worked fine with the 0.8 runtime.
The issue is either with the Oculus Runtime 1.3 or with the new NVidia driver (364.72). (And maybe only on DK2?)
Also, maybe related to this bug, ATW does not seem to work on my setup. When I have the above mentioned V-Sync miss every other frame, I get a kind-of ghost effect, as if two frames are blended together. It is worse than having normal judder I think.
While I intend to buy newer video card and a CV1 when I will have some money to spare, I would like to make progress with my development until then. So it would be cool to make this stuff work propery on my current setup. As a workaround, ,can I switch off ATW or dynamic queue ahead somehow?