Quest MRC Final set up
Hi,
Hitting a big wall with OBS, need help to finish set up:
Hardware
Elgato HD60S + Hero6 Gopro;
RTX2070 Nvidia + i7-9700K
Windows 10;
Steps taken:
1. Created a developer account with an organisation name as "y" and App name as "z";
2.Downloaded the Mixed reality resources 2.0 from https://developer.oculus.com/downloads/package/mixed-reality-capture-tools/
3.Set up ADB and device was found;
4.Ran MrcCameraCalibration.apk and able to find the app from the unknown in the Quest deviceo as per link https://developer.oculus.com/documentation/quest/latest/concepts/mr-camera/
5. From the same link as step 4, "Calibrate the Camera", I created an empty mrc.xml file to my desktop, saved the file by clicking "open" as there was no "save" button (even though as admin I had all access - I verified the file after and the camera input were in the file, so the file was not empty after clicking open - then put the file in a location in my C drive;
---> I tried to save two files at this step (which I then tested to use in step 7), first file saved the mrc.xml without cliking on "chroma", which is the final step of the "calibrate camera" sequence; then I tried by proceeding to "chroma" sequence and saved that file to camera as a mrc.xml;
-----> I then closed at both times the window to the camera;
----------> trying two methods, I then did as per the instructions in the "Transfer the Calibration File to your Oculus Quest" I as adb shell mkdir -p /sdcard/Android/data/com.{yourorgname}.{yourappname}/files as adb shell mkdir -p /sdcard/Android/data/com.y.z/files, but this also didn't work, so I tried putting adb shell mkdir -p /sdcard/Android/data/com.myoculusaccountname.beatsaber/files (this also in latter steps didn't work);
-----> file was moved successfully, and then went back to home in the vr headset (all this time never did it ask for a guardian recalibration, nor did I make the headset go to sleep as it had tape on it;
6. installed OBS, put all the plugins into the relevant folders as per this link C:\Program Files\Oculus\Oculus Mixed Reality\1.41.0_RC1\OVRCameraCalibration_PC\Assets\mrc.xml;
7. I could see "OculusMrcSource" as the name listed after clicking on the "+" in the source section, it did not say "Oculus MRC" as described;
---> I followed the instructions, but when I tried to apply the "filter crop/pad" my two OculusMrcSource, just either kept being Blue, or Grey;
------> The video capture I used was visible in the OBS, and applied the Chroma in the OBS;
8. I tried to connect the OculusMrcSource, but could not connect....nothing happened...
I tried so many variations to get this to work, but really need help to get this going, would really appreciate your help.
Thanks very much.
Laz
Hitting a big wall with OBS, need help to finish set up:
Hardware
Elgato HD60S + Hero6 Gopro;
RTX2070 Nvidia + i7-9700K
Windows 10;
Steps taken:
1. Created a developer account with an organisation name as "y" and App name as "z";
2.Downloaded the Mixed reality resources 2.0 from https://developer.oculus.com/downloads/package/mixed-reality-capture-tools/
3.Set up ADB and device was found;
4.Ran MrcCameraCalibration.apk and able to find the app from the unknown in the Quest deviceo as per link https://developer.oculus.com/documentation/quest/latest/concepts/mr-camera/
5. From the same link as step 4, "Calibrate the Camera", I created an empty mrc.xml file to my desktop, saved the file by clicking "open" as there was no "save" button (even though as admin I had all access - I verified the file after and the camera input were in the file, so the file was not empty after clicking open - then put the file in a location in my C drive;
---> I tried to save two files at this step (which I then tested to use in step 7), first file saved the mrc.xml without cliking on "chroma", which is the final step of the "calibrate camera" sequence; then I tried by proceeding to "chroma" sequence and saved that file to camera as a mrc.xml;
-----> I then closed at both times the window to the camera;
----------> trying two methods, I then did as per the instructions in the "Transfer the Calibration File to your Oculus Quest" I as adb shell mkdir -p /sdcard/Android/data/com.{yourorgname}.{yourappname}/files as adb shell mkdir -p /sdcard/Android/data/com.y.z/files, but this also didn't work, so I tried putting adb shell mkdir -p /sdcard/Android/data/com.myoculusaccountname.beatsaber/files (this also in latter steps didn't work);
-----> file was moved successfully, and then went back to home in the vr headset (all this time never did it ask for a guardian recalibration, nor did I make the headset go to sleep as it had tape on it;
6. installed OBS, put all the plugins into the relevant folders as per this link C:\Program Files\Oculus\Oculus Mixed Reality\1.41.0_RC1\OVRCameraCalibration_PC\Assets\mrc.xml;
7. I could see "OculusMrcSource" as the name listed after clicking on the "+" in the source section, it did not say "Oculus MRC" as described;
---> I followed the instructions, but when I tried to apply the "filter crop/pad" my two OculusMrcSource, just either kept being Blue, or Grey;
------> The video capture I used was visible in the OBS, and applied the Chroma in the OBS;
8. I tried to connect the OculusMrcSource, but could not connect....nothing happened...
I tried so many variations to get this to work, but really need help to get this going, would really appreciate your help.
Thanks very much.
Laz