v2.3 PTC Release Thread

I still don't have the Navigator set as my default interface. I have a Quest 3, PTC and Dev Mode are enabled. With v83, I could activate the Navigator via Advanced, which I liked back then. It was disabled with v85. The Navigator is installed on my headset, and I can open it as a window. I can also see via adb that the Navigator stack is running in the background; the only thing not yet running through the Navigator is home_default. Regarding the update, I've noticed the following bugs: 1. I can't open the browser from the taskbar, but I can from the Library. 2. My pop up notifications are blue, not gray as usual. 3. When three windows are open and I close the middle one, one of the side windows doesn't automatically move back to the center.

(P.S sorry for the English, i use Translation because I normaly don't speak English)

v2.3 after factory reset, Quest Pro
- the interface propose to scan my surrounding, while it's a Quest3 feature, the depth sensor is disabled on the QuestPro, I can't scan my furnitures
- huge stuttering that disappeared after some times (but at some point, the frame rate was below 20 fps)
- losing WiFi regularly for one second or more when using Steam Link
- Quest Pro controller is getting an offset every 30s that doesn't resolve itself (I have this issue since day one, on three different controllers so it's not hardware related) as before where I was putting the drifting controller in my back a few seconds to make the headset/controller line of sight occluded, then bringing the controller in front my face/the headset, it used to recalibrate after a few seconds. This issue makes the headset useless when randomly one of your controller is multiple meters away from your actual hand...

Note I tried to leave PTC, performed a factory reset : I haven't been rollback to 2.1, I'm stuck on 2.3... 

Edit : After thousand hours of VR, it's just today I found a way to force the quest pro controller to reset its tracking : I bring the controller inside a pocket/below my t-shirt for a few seconds, then bring it in front of the headset -> it resets the tracking... At least I can use my Quest Pro without restarting my controller every few minutes

Edit2: Using Virtual Desktop, I don't experiment the Wifi/PC streaming connexion issues (losing stream for a few seconds from time to time) so it totally can be a Steam Link/SteamVR issue

After the latest update, I get a whole array of problems such as a "shell error" window opening and wanting to close shell, then the whole operating system starts to lag a lot, screen tearing, controller issues, and having to keep my finger on the power button for an extended amount of time to try and force powering off.. I'm afraid at this point the quest is unusable..

Meta really has dumped the Quest 3 !! Just read the release notes... Seems as if there is only 1 person left in the building working on the Quest 3 operating system ?  this isn't an update more like a very small software patch.!

I'm also have this exact issue on my Quest Pro with PTC 2.3, I also cant downgrade even with opting out and factory resetting twice.

- Quest Pro controller is getting an offset every 30s that doesn't resolve itself (I have this issue since day one, on three different controllers so it's not hardware related) as before where I was putting the drifting controller in my back a few seconds to make the headset/controller line of sight occluded, then bringing the controller in front my face/the headset, it used to recalibrate after a few seconds. This issue makes the headset useless when randomly one of your controller is multiple meters away from your actual hand...

Note I tried to leave PTC, performed a factory reset : I haven't been rollback to 2.1, I'm stuck on 2.3... 

Edit : After thousand hours of VR, it's just today I found a way to force the quest pro controller to reset its tracking : I bring the controller inside a pocket/below my t-shirt for a few seconds, then bring it in front of the headset -> it resets the tracking... At least I can use my Quest Pro without restarting my controller every few minutes

New version landed today : I still experiment the joystick tracking drift after a few seconds... Nothing improved on that side

2.3 needs to be revoked its broken controller tracking so badly on quest pro its unusable and i cant get out of ptc, it was ok in 2.1

@liamreed Do you not understand the purpose of the PTC program Liam. Your device is a guinea pig for untested firmware/software. They won't revoke because they're using your device and others to find bugs. There will probably be a lot more so there's not much point in complaining about it here. You decided to join it, so while you are helping a lot with getting this version tested, there are risks. If you find it too difficult, I suggest that you leave PTC so you will have only stable updates after v2.3. As you can't revert to v2.1 you'll have to put up with it until the stable version is released. 

liamreed The version won't be revoked until the bugs are fixed. When the official v2.3 is released I suggest you leave the program then. As you probably know, leaving now doesn't mean you'll go back to v2.1. It doesn't work like that. I admire the people with the patience and forbearance to test the software but if you want a trouble-free experience Liam, just leave it. It's not worth it. 

I know but if you check through the forum you'll see that a lot of people who left PTC were still on v2.3 after they factory reset.. Maybe it reaches a point of no return. Anyway no point in arguing with me about it. Hopefully the official release will come soon.