RTX 5060 Ti Stuck on loading screen Fix with Quest 2

  So, I've had this problem when I got my new desktop. Which had the requirements to use the Meta Quest Link with the RTX 50 series. About 6 months of banging my head against the wall to figure out what was wrong (Meta Quest Support was less than helpful), I have finally found a solution to the infinite loading screen for 5060 Ti graphic cards.

  Thanks to Google Gemini: https://gemini.google.com/share/1685782c62af 

  Basically you need to do is to turn off asynchronous spacewarp: 

1. Open the Oculus Debug Tool (C:\Program Files\Oculus\Support\oculus-diagnostics\OculusDebugTool.exe). Or (C:\Program Files\Meta Horizon\Support\oculus-diagnostics\OculusDebugTool.exe).

2. Locate Asynchronous Spacewarp.

3. Change it from "Auto" to Disabled.

4. Go to the top menu: Service > Restart Oculus Service.

After these steps you should be able to boot into the Horizon Link home screen (White Grid). The best explanation Gemini gave me as to why this was a problem;

"the Meta software likely had a "handshake" bug where it tried to engage ASW unnecessarily during the initial loading phase. Because the 50-series architecture (Blackwell) handles frame generation differently than previous generations, the Quest 2 gets "confused" by the synthesized frames and hangs on those infinite dots."

I hope this post gets the attention it needs. Because even with log files, tech support didn't know what caused problem.