I used to be able to set up a boundary, but it will no longer let me do so. Here's the process that I take, and the results:Power on the Meta Quest 2Go to Settings. The tile for Boundaries shows the status as "Off"Choose Boundaries. The current boundary is a stationary boundary (a circle on the floor)Choose to create a boundaryDraw the boundary. I am able to do thisConfirm that the boundary is correctIt takes me back to the Settings page. When I look at the Boundaries tile, it still shows as off. My boundary is still a stationary boundary.I used to be able to draw a boundary in this room, but no longer can. Has anyone seen this before and know what to do? Thanks in advance for your help!

New Participant

Solved

Meta Quest 2 - Can no longer set up a boundary

23 replies
7513 views

I used to be able to set up a boundary, but it will no longer let me do so. Here's the process that I take, and the results:

Power on the Meta Quest 2
Go to Settings. The tile for Boundaries shows the status as "Off"
Choose Boundaries. The current boundary is a stationary boundary (a circle on the floor)
Choose to create a boundary
Draw the boundary. I am able to do this
Confirm that the boundary is correct
It takes me back to the Settings page. When I look at the Boundaries tile, it still shows as off. My boundary is still a stationary boundary.

I used to be able to draw a boundary in this room, but no longer can. Has anyone seen this before and know what to do? Thanks in advance for your help!

M

MikeStarpolAnswer

Participant

it will show You off if You are in a PASS THROUGH MODE ( so when You can see Your surroundings instead of virtual room ). When in actual virtual room it shows correct setted up value

Choleni

Honored Contributor

Hi KenTremendous434 🙂

Tap the "Boundary" tile in the quick settings menu.

This will open a pop-up window where you can choose between stationary or roomscale boundary.

V

vetteguy76

Participant

My Oculus 2 is having the same issue. I have rebooted a dozen times. I get to the main screen, go into settings and Boundary shows as 'Off'. Clicking on it just freezes the controllers for a few seconds but doesn't go anywhere. This started out of the blue the other day. Nothing I do will allow me to set a boundary that sticks (neither room scale nor stationary). I have cleared the boundary history, that did not help except to get the pop-ups to set a new boundary, that didn't work to clear the issue. Thoughts?

Choleni

Honored Contributor

KenTremendous434 and vetteguy76

I assume you have a developer account, is that correct?

Regular users - like me - can't disable the boundary.

Have you tried if enabling/disableing the boundary in the dev settings and then restaring the headset makes any difference?

Are you able to set the boundary status to "on" by doing that?

M

MikeStarpolAnswer

Participant

it will show You off if You are in a PASS THROUGH MODE ( so when You can see Your surroundings instead of virtual room ). When in actual virtual room it shows correct setted up value

V

vetteguy76

Participant

Mike - I'd love if that were the case.. but I'm in the virtual room and it still won't let me set a boundary.. and says 'Off'. I don't have a developer account, just a regular user. It started a few days ago.. perhaps a recent update has a 'bug'? I haven't done anything different than I have a 100 times before. Same room, same spot, etc..

M

MikeStarpol

Participant

Strange and sad. I also have quest 2 and everything works fine. I assume You did went to settings -> general and checked for updates directly from the device? It says 77.10xxx ?

Also did You do the device reset from the settings menu or only via power button?

EDIT: I don't have developer account as well but, You can also try to do to settings -> privacy & safety -> device permission and clear the last option " clear physical space history ". After that restart the headset from the settings -> general -> power and see if that helps.

Are You sure You don't have "developer settings" option in device settings?

Choleni

Honored Contributor

Simple solution!

Thank you MikeStarpol 👍

G

GijsBillen

New Participant

Same issue here. I have a developer account and some other developer accounts we have in our organization have the same problem. It seems in the latest update available to my Quest 3 (v77.1027, Build 5097426.10680.520), whenever you swap to the stationary boundary you cannot swap back to roomscale. Factory Reset would probably solve the issue as long as you don't pick stationary again. And sideloading to a previous version might also work.
Do not know if there's any other solutions to this of a less cumbersome nature. Lots of our partners are having this issue from having accidentally pressed the stationary boundary button.
As a temporary improvement you can *slightly* increase the size of this boundary by changing the boundary size in the settings.

S

Shaw251

New Participant

Having the same boundary issues as others in this thread. I did not make any changes in the settings. I have rebooted, cleared and re-established the boundaries using roomscale. I'm still getting the stationary circle w/ passthrough. I do NOT want that! I want to have my room scale grid back ( when I get close to the boundary the roomscale grid shows in the virtual environment) How do I change back to that setting?

A

Andres1120

Participant

Hi, were you able to fix this issue?

MetaStoreHelp

Community Manager

Hi there Andres1120,

We see you are having issues setting up your boundary on your headset, so we can run through some troubleshooting with you could you please send us a private message.

Please select our name to get to our profile page, or click here: https://metaque.st/CommunitySupport. Next, click "Send a Message" to privately message us! Please remember, you must be signed into the community first to send us a private message.

Looking forward to hearing from you soon!

If you're the author of a thread, remember to mark a reply as the Accepted Solution to help others find answers!

A

Andres1120

Participant

Hi Ken, im having this same issue. How did you solve this?

steve40

Honored Contributor

After you have drawn a boundary, go into QUICK SETTINGS and you can select either a stationary boundary or room-scale boundary from the boundary option there.

A

Andres1120

Participant

Thanks steve but unfortunately no matter how many times i set it up and go into quick settings it says off and when i click it again it makes me re do the whole boundry setup process. Its weird that it’s doing this out of know where when it worked fine before.

Get Help

Sign up

Login with SSO

Login to the community

Login with SSO