Quest 3 update 25 April 2025 causing Quest 3 and MSFS to crash

---

RickMacca wrote:

Since a software update today (25 April 2025) on my Quest 3, I have been having problems - the Quest 3 has distorted VR image, and frequently freezes and crashes. When using the Quest 3, MSFS also crashes unexpectedly. MSFS performs normally when not using the Quest 3.
My Quest 3 has been performing well until immediately after the update, so I have to suspect the update has caused the problem.

Has anyone else experienced this? 

---

I got the non-PTC v76 update on my Q3/rtx4090 earlier today (v76.1023) and all's working fine standalone and PCVR with Link and wireless with Air Link.  Tested a few standalone and PCVR apps today, including msfs2020 and everything ran very well.  Also, my Q3 headset and Q3 Elite battery strap seem to be charging up fine (both to 100%/green)  I can't say I notice any significant performance differences, but I'm always happy when updates don't brick anything, lol!

I also got a non-beta update v76 on my meta-link pc app today (v76.0.0.452.315).  The PC app update sometimes lags a little behind so maybe check to see what version your on (scroll down to the bottom of the settings/general tab).  If it's still on v74 and hasn't updated to v76 yet you may want to try forcing it to do so by going to the setting/beta tab and select the top option to get the beta version.  I've needed to do this in the past and after about a week I disabled the beta option and it quickly updated to the same v76 version.  I've found in the past that things work better if both your headset and PC app are on the same update version.

After updates, I've also found that it helps to do a restart or two.  If you're still having problems I suggest you contact meta support including your log files (google how to this) and see if they can help.  Good luck mate and cheers.

add F1 to that list, its defintely the update, i was on both F1 and MSFS yesterday all day got an update today and didnt even get 5 minuets on either, screen go black like it isnt even turned on while both games still respond on the monitor

I used my quest fine yesterday, connected via cable link.

The quest link software was updated after this (twice apparently) and today it takes an age to open/load on windows and doesnt detect the quest 3. so no iracing for me 😞

Hello, yes, I have exactly the same problem.
I've spent over 6 hours researching the issue; I've done everything!
Installed and repaired the Quest Link PC program.
Updated ALL my drivers!
Disabled my processor's graphics card because I thought Quest Link didn't know which GPU to use.
I tried all the USB-C ports on my tower.
Last night, no luck. I managed to get a green USB test in Quest Link, and I was then able to do several laps of the circuit in VR.
I rebooted the PC afterward, and it became impossible to connect via Link again.
IT'S CLEARLY V76 THAT'S CAUSING THE PROBLEM WITH LINK WITH THE CABLE.
I had no problems with V72.

same thing on Thursday their update slammed me and my Oculus Rift, and the update came in while I was using VR! at night !! bad timing !, two days of hell. they wrecked my whole night! it took until late Friday for the update to go through! so mad, never gain, when this breaks I am done with meta!

Hi there,

Thank you for bringing this issue to our attention. We understand that you are having display and software issues after a recent update of your Meta Quest 3. We would like to investigate further, and for this we will require some information about your device and account that we wouldn't want you to disclose in a public space. 

Please send us a private message to help you with this query. Select our name to get to our profile page, or click here: https://www.meta.com/help/support/. Next, click "Send a Message". Please remember, you must be signed into the community first to send us a private message. 

We hope to hear from you soon!

same probleme all wass working good before  the quest 3 have ask me for update  afther the update always freeze bug  wee want a update for fix it !!  specs pc i9 14900kf 32gb ddr5  2080ti strix 

Discussion with IA Grok on the issue.
New Display Port ALT MODE???
Why DisplayPort Alternate Mode might be involved

Increased complexity: • The addition of DisplayPort Alternate Mode introduces a new way for the Quest to communicate with the PC, treating it as a DisplayPort display in addition to its usual role as a VR headset via Quest Link. This dual functionality can complicate the management of USB-C connections, drivers, and communication protocols. • If the software (Horizon OS or the Oculus PC app) is not fully optimized to handle this mode, it can lead to instabilities, such as connection failures, slowdowns, or crashes.

Hardware and software compatibility: • DisplayPort Alternate Mode requires that the PC, USB-C cable, and headset all support this standard. If a single component (e.g., a non-DisplayPort-compatible USB-C port or a misconfigured GPU driver) is not working properly, it can disrupt Quest Link operation, even for users not actively using this mode. • Nvidia 5000 series GPUs, mentioned in some reports on X, appear to be particularly affected by compatibility issues with v76, which could be exacerbated by the new mode.

Since the Meta updates of the last few days, my system has returned to normal.

---

RickMacca wrote:

Since a software update today (25 April 2025) on my Quest 3, I have been having problems - the Quest 3 has distorted VR image, and frequently freezes and crashes. When using the Quest 3, MSFS also crashes unexpectedly. MSFS performs normally when not using the Quest 3.
My Quest 3 has been performing well until immediately after the update, so I have to suspect the update has caused the problem.

Has anyone else experienced this? 

---

With the latest nvidia 576.28 driver, for msfs2020 you need to enable dx12 in the PC graphics menu, then restart.  This actually works better now than the default dx11 imho.