VR Forums

Desde la ultima actualizacion v83 no puedo utilizar en limite fijo dentro de Meta link, solo el limite de entrono el cual genera una asquerosa malla visible todo el tiempo ya que aparentemente necesitas una habitacion vacia de 10 x 10 metros para poder utulizar sin problemas debido a la sensibilidad del sistema guardian, ademas de que por alguna razon cada que cambio entre entorno y aplicacion hay una pantalla intermedia en un entorno 3D de esos tipicos de meta worlds, terribles por cierto, honestamente cada vez me arrepiento mas de haber comprado esta porqueria de tecnologia, cada vez menos util y mas adaptada a su asqueroso metaverso.

just tried to link headset with internet connected now get a static crackle through  the headset and still no conection to meta horizon  what ever you did in your last updates has slowed conection speed of vr headset in game ie from desktop to VR it used to be istant now it takes approx 15 seconds who ever is doing the updates is making things worse 

I'm a Quest3 application developer on Unity. I'm developing my application using Unity. I streamed my Quest to the computer using Meta Horizon Link + streaming cable, and then clicked "Run with Unity" to start my project. At this point, Quest didn't succeed, but I could still see the Unity editor. Theoretically, it should have entered my VR application, but it seems that it didn't start successfully.However, when I unchecked the Meta XR Feature in open xr setting, Unity Editor run this application normally, but all the Meta XR functions were lost. The screen moves along with my head (head tracking fails), and it cannot detect any controllers or gestures. The software version of my Quest 3 is v0.83. The version of Meta Horizo n Link is 0.83/0.85 (both versions have been tested and the phenomenon is the same), and the version of Meta XR SDK has also been tested (0.83, 0.77, 0.76, 0.74). What caused this?I used the official sample scenario. I repeatedly checked all the configurations of U

Ever since I dropped my quest 3s, I haven’t been able to get into my headset because the screen keeps freezing then unfreezing and keeps doing that, the controllers also just buzz over and over again and I don’t know what to do

I'd like to request an RMA. I was unable to create a support ticket for reasons that I'm not going to explain here because I've already made the same post over and over again. Meta support told me to message them "privately" on this forum site but I don't know how to do that so I'm creating a discussion.  The account that I'm using to create this discussion is the same account that contains my quest 3S. Meta, if you're able to, i'd like it if you could remove the support ticket created around february 2025. I created an RMA request but i never actually returned the product and the ticket is still open, and it's preventing me from creating a new ticket. if you were able to remove that ticket, i would probably be able to create a new one. thank you in advanced.

Please add a way to mute or turn off the system sounds when using a Quest headset - it is mind-blowing to me that we can be on v77 & somehow that option isn’t there.Please also allow us to turn off the background sounds which are present in each of the Home environments, too. It actually makes zero sense to even have them - I currently can’t use any of the environments whilst trying to consume media within windows on Quest - e.g. watching a YouTube video - because the pointless environmental sounds will continuously play, spoiling the audio of the video I’m trying to watch.

Like a huge number of you, yesterday the Link between the Quest 3 (and probably 1 and 2 also) will NOT connect to the Meta Horizon Link running on my Windows PC. So, the ability to do PCVR from ones headset is gone. Apparently, this was broken by Meta sometime in the last 24 hours.But if you have Virtual Desktop, which uses its own form of linkage, IT STILL WORKS, and you can continue doing PCVR through it! (Not a commercial for Virtual Desktop, I just happen to already have it and use it for Flight Simulations which require a high level of performance in PCVR). It is a stunning failure that in 24 hours a company that has sold MILLIONS of these VR headsets can completely destroy the ability to use them for PCVR! How does a failure of software development, testing, and deployment get inflicted on the ENTIRE (Meta) WORLD of PCVR in ONE day?Yeah, I know that Meta will fix this fairly quickly, but some of us use these headsets in a work environment. And those HOURS spent yesterda

My son can't get his headset to load anything.  It will power on and logo spin, controllers vibrate and then a grey screen.  I can get to the boot screen, reboot and nothing changes, power off and back on, still nothing.   It tries to sideline update install and kicks it out halfway thru install.  I know nothing about these devices and I dont think he had cloud backup setup.  He's autistic and super stressed about having to factory reset.  Anyone  have any other suggestions or is he doomed to lose his whole world?  Help a mama out please!!!

 

I have a oculus quest 2 with a gaming pc everything was working fine until this recent update and now I'm back to square one sadly, I have tried the most recent solution of blocking the oculusdash.exe and also trying the other recent solution that involves turning off your Wifi for the pc and oculus and then switch on again and nothing is working but a very slow loading/connecting page on my oculus screen,,

I have the Oculus Rift S and I purchased it in 2020. I was using last night with no issues at all, and I took a 20-minute break and when I came back to it the screen was black and nothing was working. It recognized the cables were plugged in and it could see that the sensors are working and I would even get the audio from my PC through the rift headset, but when I went to continue setup in VR it is just a black screen. I have uninstalled and re installed the meta quest app several times along with restarting my computer and even updating all drivers and other possible update my computer could have but nothing is fixing it.  When I try and contact customer support it asks me to verify my device using the serial number or email, but when I put either of those in it is unable to find my product, but I have the product in my hand and my original order email. This whole process has been quite frustrating because it stopped working in a blink of an eye and the meta support has been less

My Quest 3 that I got in early December spontaneously stopped receiving or holding a charge to its battery. I use BoboVR accessories and have two spare batteries, the batteries do not charge the headset any more. Plugging in the headset onto its charger that it came with doesn’t charge it. I have checked that the charging cable is functional, as is the adapter it came with - still no luck. I have tried factory resetting the headset, but it has since died and I cannot get the menu to pop up. Looking in the Meta Horizon App hasn’t aided me either.Was there a bad update that rolled out and hurt the battery? The primary thing I use it for is VRChat. I kept out unplugged when not in use or when it was on low battery, but otherwise primarily used the BoboVR batteries to extend uptime as instructed, for roughly 3-6 hour intervals. I still have the warranty. Should I send it in to be fixed?

For context my left controller doesn’t work for an unknown reason. The meta ai told me a battery might have come out during sometime playing. I am unable to open both controller panels and access the battery and I need help. What do I do? I have meta quest 3 btw

I always could just grab the white line and move the taskbar back and out of the way, now I can't grasp it, and it won't lock on and move. All the other windows can be moved, but the taskbar is no longer moveable.

i have problems with Q3 like every 2 months and every time different issue and every time after ur updates:) very nice job... it was like tracking issues and stuff... and now im stuck in the link connecting screen (for cable and air too)... i tried new drivers, new cable, different USB, ur special tactic with deleting every trace of data from PC and reinstalling app, factory reset of headset, another tactic from redit restarting and changing oculus vr runtime service to manual, tried that shmaxy thing with sideload update and nothing works...+i purchased ur product with intent of using it not for me to troubleshoot after every few updates cause of ur fakaps... i want to use my property:) Q2 works normally how is that possible?

hi so i have a ,eta quest 3 and a pc with a 4060 5600g and 24 gb ram and i use link cable so i was playing pcvr last night and then after playing it needed a update i updated and now it wont let me start pcve i tried restarting my pc and vr i tried useing air link i tried a dffent usb port i tried everything i can think off 

After having a failing discussion with the meta support ai I’ve turned to the community. My left controller is charged 100% and won’t work with my meta quest three and neither of the controllers batteries will slide out after I’ve watched countless videos about it. I’m not sure what to do with my left controller as I’ve had it for only a year and the right one works fine. This randomly happened and I keep amazing care of it.

headset wont connect to pc via a link cable. i press enable link and headset gets stuck on meta logo sign. cant see my pc home screen.

I have the following problem with spatial tracking on the Quest 3 headset.I noticed that during gameplay in the project I am working on, the headset seems to switch between two tracking modes. The project is about a climbing wall that rotates, and in VR we climb on it. Because the wall rotates and moves us downward, at the same time we move the virtual world (the player) upward.Here I noticed a problem: the wall moves at 2 cm/s, but the virtual world sometimes moves at 2 cm/s and sometimes at 20 cm/s. Depending on which tracking mode the headset switches to, the player (virtual world) is moved either correctly by 2 cm or incorrectly by 20 cm per second.I tried monitoring various headset parameters via logcat that could indicate the headset switching to a different tracking mode, but I couldn’t find anything. I should add that the headset operates during climbing in rather uncomfortable conditions (very close to the wall), so I take into account that these are not ideal operating condit

i can see the displayport connection at the device manager idk what i need to do. my gpu is arc b580 is it have support for vr?

I've seen a few posts on this, hoping another will help push this to the devs to get a fix out asap - since last time meta bricked the cable link, it was down for 2 whole weeks. I have done everything meta can and will recommend. All my drivers are up to day, my headset and link app both up to date, both restarted, reinstalled the link app, etc etc. Meta. fix your updates.

Hi, my wallet was restricted due to unusual activity on the 08/12/25. I have been sending messages to or from Meta Quest Support since then with no resolution. Meta are still investigating but nothing has worked so far. I am worried that I will have to set up another account and lose all the bundles and cosmetics I have bought on Gorilla Tag. This has been extremely frustrating as I can no longer buy shiny rocks that my friends can. Any help will be appreciated Thanks  

Windows 11, NVIDIA 4090, Intel 13Meta Horizon Link version 83.0.0.333.349 (83.0.0.333.349)Played happily in Meta Link all day. All of the sudden:Error message:"Meta Quest Link is not working  correctly – click here to read our support article" (leads to generic support website)Interventions so far:Updated NVDIA Studio DriverUSB3 cable wo power tests correctly at 2.5GBpsUSB3 cable with power tests correctly at 2.5GBpsMeta Horizon Link App Reinstall did not workMeta Horizon Link App Repair did not workAuto Protect Disable did not workFirewall Protect Disable did not workDid not try head set factory reset yet.Any tips old friends? So frustrated…

When I go full screen on a app (clicking the bottom bar full screen thing), how would I make that vanish automatically because I'm using a different browser and that bottom bar does not go away (Meta Quest 3s)

is the promo still going? i just bought one today but i dont see where to activate it, all i see is the 3 month trial