Pairing & Connections

Can the NVIDIA GeForce GTX 1650 use Meta Quest Link?

When i try to connect my quest 2 to my pc using airlink then it instantly gray's out. If i try to use an another pc and it is unavailable then it takes time to gray out not instantly. If another pc is available then it works normally. I have factory reset my quest and did a clean install of windows 10 and the quest pc app.I have reset my router, anything that could be reset. SteamVR works fine with steam link. I was casually using AirLink and one day i turned my quest off and then the next day it just didnt connect and hasn't since. There werent any updates so that coulnt be the issue.

This notification ruins the gaming experience for many people. It turns the screen off and shows the "Liquid or debris detected, charging port disabled" notification. I'm in a simracing game and have to switch to the controller and close that popup to continue the game, which I already crashed thanks to the stupid notification. I don't care if the charging is disabled or not, please don't turn my screen off in the middle of a game.

Having tried one of the apps to connect my Android phone to Meta (without success) I happened upon a really good solution that works without using ´developer mode´and all the issues that accompany it.DisplayPass is a free pairing solution available on Android and Meta. It´s really simple to pair the transmitter (Android) and receiver (Meta) devices on the same WiFi network, at which point you get to see your phone display in a typical Meta virtual window ... without any discernible lag."Great" you say, "but I don´t just want to cast my mobile device to the Meta, I want to use it"No problem. Just invest in a 2.4g/Bluetooth keyboard and mouse that supports Android. I bought a combo by Subblim for 20 euros that allows connection to my PC, Android and Meta, with hotkeys to switch between them. During Android connection a cursor displayed on the mobile screen acts just like your finger with clicking, swiping and dragging, so when connected through DisplayPass you can operate almost anything

Hi team, I'm getting micro lags and stutter in Airlink on my Quest 3 (EU/UK), esp. when moving my head. In the Oculus debug overlay this causes brief spikes in transmit/decode, fps drops and visible stuttering. The issue is not present on my Quest Pro with otherwise identical settings - see below screenshots to illustrate. Few more details:- Issue is not present on Quest Pro with same settings on HMD, router and PC (using same res)- Issue is worse at higher bitrates, esp. >200mbps, but still present <200mbps- Issue is unrelated to PC/game latencies (CPU, GPU, Queue each <5ms)- Stutters/lags are intermittent (every 10-20 seconds) when not moving but happen immediately and reproducibly when moving the head to either side or especially looking downwards (i.e. on any bigger headset movements)- Wifi 6E router (TP Link AXE75 EU/UK)- EDIT: exact same issue with Asus RT-AXE7800 (EU/UK) wifi 6e router- Connection shows as 2,400mbps- Airlink codec H264 (but same on other codecs)- I

When I go to put my pair code on my phone it says couldn’t pair with ur headset, then when I try to factory reset and try again it says the same thing someone please help 

I see lots of similar posts about things surrounding this issue but they usually get brushed off, I am hoping that making this post and outlining what I have done so far it may finally prompt a fix. Essentially the issue is that when connecting with a USB 2.0 connection, the link is completely stable, it reliably connects for several hours and even if the headset is removed and left to "sleep", it reawakens and is still successfully connected (team events in iRacing if you're asking). When using USB 3.0 however, the exact opposite is true, generally speaking in the best case scenario, when keeping the headset awake the whole time, I can sometimes get an hour before a disconnect, however, nearly every time it goes to sleep, it disconnects and sometimes the connection will be lost within minutes of launching with no explanation. For a bit of history, over the course of trying to find a solution to this issue I have: Used a USB A-C 3.0 cable, 2x USB C-C 3.0 cables (including Ocu

My instagram account got banned for no reason last night and my meta quest 3 was connected using that account and when i tried using my vr today it wouldnt work so I tried logging in with a new account. After creating the new account I went to the http://www.meta.com/device page to log into my new account and everything was going fine until i got up to the part where I had to enter the code shown on my vr which is the 6 Digit one and I was met with a invalid code message and it wouldnt let me log in. Yes I tried doing the whole process over and over 3 times but no it didnt work each and everytime. Somebody please help me.

i have a intel i3-1215U which is better then the minimum CPU as I'm on a laptop and i need to connect so I'm wondering if there is a work around.if you know one please let me know.

So, my headset had been working perfectly since i got it, and vie never had any issues with anything. But after my WIFI went out yesterday, i cant connect to it with my headset, but everything else can connect. It says, Saved/Check password and try again. i Know the password is right. I did ALL of the fixes that people suggested and in the end i ended up factory restarting my headset. Even after the factory restart, it STILL wont connect. now im stuck on the Setting up your WIFI bit of setting up a headset and now i cant even play offline games because i cant connect to WIFI. So my headset is currently just unusable. What can i do to fix this?

So I have a cable that is USB 3.0. I am able to connect to my PC via this cable, everything works fine. When I pair it pairs and leads me to the screen where everything is gray and has the grid pattern around with the text "Remove Headset and continue pairing on your computer." When i continue on my PC and press the blue check connection button, it immediately disconnects and says there was an issue connecting. But when I don't press the link button in my headset and run the check connection, it says it has a stable connection at 2.5 Gbps. I'm not sure what to do from here.

It's been at least a year since i've used the system and I didn't have any problems before. I've changed the controller batteries, I updated the software. I unpaired, and re-paired the controller with a fresh battery. Not sure what else to do. In the middle of beat saber, the left one will just disappear and then reappear across the screen.The controller just keeps going on and off. Please help 

I have the Meta quest 3. I need to update my computer to one that supports Windows 11. I am looking at a mini computer that has the AMD Radeon 780M. Will I be able to link to the computer using the cable and airlink?

In meta horizon app after allowing permissions i still can't choose the quest model in new connection menu and therefore can't pair the headset. Permissions are allowed but the buttons with headset models are gray and I can't interact with them

So I lost my instagram account and it was deleted as well as my meta account which was connected together now the meta quest 3 is glitched and it won’t let me get into another it’s only letting try to sign back in for the lost account 

HelloI want to update my casque It's a RIFT but now I have blocked on the first screen.it say to download app meta mobile and enter the code. But the casque isn't recognized. Restore factory parameters no good.Impossible to retore with the good version.Can you help me thanks

Buenas buenas tengo unas oculus 2 las cuales he tenido que reiniciar a parámetro de fábrica y ahora no me deja pasar a la volverá a configurarlas de la primera pantalla que salen los mandos pero me dice que quite los precintos que venían de fábrica y yo ya no tengo sus precintos y no hay forma de continuar si no se quitan esos precintos como lo puedo hacer  

I'm setting up my new Meta Quest 3 and I downloaded the app on my phone, however whenever I boot it, it's stuck on a black screen and does nothing

Cannot pair my meta quest 3 at all, my Internet is connected and it then decided to do a factory reset on its own and then the fans were going on themselves whilst it was off. Need help? 

Здравствуйте, помогите пожалуйста! Не могу зайти на свой аккаунт Meta, на компьютере. При попытке зайти на свой аккаунт, через логин и пароль, мне говорят что логин/пароль введен не верно Когда захожу через "Войти", перебрасывает на сайт, но ничего далее не происходит (На браузере без проблем заходит на аккаунт) 

Hi, is it possible to pair quest 2 with only left controller? last time I use this device is years ago, but I can't pair using meta horizon (the name was meta quest app if I not mistaken), then I sideload the latest firmware, tried to pair again, it has no problem until pairing the right controller step, I realize the right controller can't turned on with new battery (broken). Hope someone can help to skip this step, if no solution, it's sad I have to forget this vr device.

My quest 3 controller is connected but not showing. Only these purple light. Should I get a new one or is it solvable? 

Hi Meta Community,I'm having an issue with my Meta Quest Pro where the left controller refuses to connect to the headset and is essentially not working. Both the headset and controllers are updated to the latest software available. I have tried rebooting and re-pairing, but the left controller still won't connect.Unfortunately, my device is out of warranty, so I’m wondering what options I have.Does Meta offer any kind of out-of-warranty service or refurbished left controllers for situations like this? Any advice or direction would be greatly appreciated.Thank you!

SpecsAMD X5800 CPUAMD 6800XTOfficial link cableRolled amd drivers back to 24.5.1Updated USB power saverLink test works fine =2.9GBClick accept link in Quest 3 and then it just hangs on loading screen and I get these notifications in windows.Works in Virutal desktop just fine. No other software running (steam VR or VD) when I attempt to use the official meta quest link software)

Yesterday, I did factory reset my Quest 1, and after that I wasn't able to go through the installation process on my phone with android Meta Horizon, with the last application installed, 343.0.0.11.106. Stuck after everything else went fine, on the security page, and this happend on three different Android devices.After research, I tried an older one Android application, 276.1.0.22.109 v8, here on apkmirror, and it worked, I found the link here, thanks to Ardes_.Several time you'll have to use the Ignore button regarding your obsolete version, but at least it'll go through the all process, means the security video will at the end make a button appear, and your Quest will be fully installed.The issue on the last app is that the video on the security section don't seem to send info to highlight one text line after one another on the page, and after the last one a button should appear, at least it does on the older Android app. I may think that's a problem with how is used the video