VR Forums

Trenches VR, the intense horror adventure created by Steelkrill Studios, isn't just a game; it's an experience that forces you to face your deepest fears, and worse yet, to keep your mouth shut!Read the full review on the Zona The Gamers website.https://zonathegamers.com/trenches-vr/ 

My Oculus (Meta Quest) is connected via Bluetooth to the Ipad. Meta Horizon recognises that they are connected. When I press Cast there is the screen for a couple of seconds saying that it is searching for headset, but then Meta Horizon suddenly closes. I suppose it is a simple software crash.I'm not able to report the issue because Meta doesn’t recognise that I have a device connected to my account. However, when I try to connect the device to my account it says that it is already connected. They also don’t want to recognise the serial number. I got the Oculus five years ago before Meta was involved, and it has been with me all the time, so clearly Meta is wrong about this. When I search for the issue, there seems to be lots of people having similar problems. Asking for factory reset is not acceptable solution for something that should very simple to solve. I realise it’s high time to upgrade my VR googles. I can get Meta Quest 3 to a much lower cost than the Oculus fiv

I accidentally dropped my left controller in a bucket of water. I immediately took out the battery and dried it as much as I can. Later i went to see if it was working and my controller didnt turn on but it said the controller was connected. Does anyone know what i should do to get it working again?

Quest2 does not work, it connected to the network  but it says it has limmited conection, what  do i do? i will return the device, because i am fed up with oculus  setups!

Hi, i updated to Version 79 and since then, im not able to resize any third party app. If i try to grab the corner i am only able to move the window instead of resize.Im still not navigator.

After upgrading to V.81 PTC, Golf+ frequently drops frames during ball contact.  (or loses tracking).It might possibly be related to brightness, as I had better results by turning almost all lights off in the room.  (something I never had to do before).   Although it also seems the longer I play the more likely the issue will become frequent.  Not sure what troubleshooting steps I can perform to narrow down the issue.

Hey! I've been trying and testing some WebXR apps for the past few days and they have been working fine with my space setup (the scan of my room). But since this morning, it's pretty messed up. The scale of the WebXR environment is not working properly in the different apps I've been trying (my own and others). It seems like it is doing a weird scaling of everything (the UI 3D panels, the objects, the planes and surfaces, etc). I thought it could be the browser and WebXR itself, but the quest device feels weird as a whole. The main menu in passthrough mode tracks a bit of my head movement, which was not happening previously. Also, I cannot focus very well on passthrough mode and looking to my surrounding makes me feel dizzy. There seems to be an offset between the real world and representations in MR (you can see that happening with my hands in the second video). This was not happening yesterday and the days before. Here is a recording of what's happening both in the browser and i

My Quest 3 recently became unable to maintain a connection to my PC via link cable, rapidly connecting and disconnecting until it is unplugged . I verified it is not the PC or Cable itself that is the problem, by connecting my Quest 3s via the same cable, to the same PC, and it works fine. The question is whether I have a hardware issue or not. I am in the PTC and recently received V79.1030 Build 5115411.10640.520. The problem was intermittent with previous versions since v77 I think.If it's a problem with the build, I would expect that others may be having the same issue. If no one else is reporting the problem, then I probably have a hardware issue with the USB C port.Also, I recently noticed that I am recent AGAIN charging to 100% and getting the green light. Since v72 ish, I was unable to charge above 75%, but that problem is gone. So they ARE doing something with the charging (USB C?) circuitry

Hi there,  I can’t redeem for Batman went to App Store clicked on it. It has the price only as an option 

hello who can help me please i have a problem.I have had the Meta Quest 3s since yesterday, I first had to install the app on my phone and then on my PC was quite a hassle, it didn't work now, luckily it was ok, I have now taken out a subscription here, so https://www.meta.com/nl/ 8.99 per month. Now I start my VR glasses and go to the Meta QuestStore there it is said I don't have a subscription while I do have one. and another problem downloaded games from the app on my pc don't see it on the vr glasses either

quest 3 on v81.1034 non ptc still no new navigator app  i had it b4 and left ptc and got downgraded to the old one..now im on the latest firmware update with old navigator ? i have on option to turn it on ?

I have a Quest 3 (about 8 weeks old). When I am using Horizon Worlds and try to enter any portal to a live event, instead of teleporting me to the event, the Quest Universal UI appears, showing a window for the Meta Store, specifically showing a page to install Horizon Worlds. But the strangest thing is that this is not the official Horizon Worlds store page - the official page has over 15,000 user ratings (with an average rating of 3.5), but the page that appears only has 16 ratings (with an average rating of 2.3)! Also strange is that it has a "download" button, while on the official store page it has a "start" button (because, of course, Worlds is already installed on my Quest 3 as part of the Universal UI and it cannot be uninstalled or re-installed). Also, when I clicked "Install", it said "Installing" but the progress bar got stuck at nearly 100% and nothing happened.The "bogus" Worlds store page that opens when I try to join a live event in Worlds.You can see in the screenshot a

There are new achievements in Bobber bay called the Bobber Bay brawl does anyone know what this is and if so where in Bobber bay it is?

I've recently updated my quest to V81. I've been testing the new enviroments, they're ok, but pretty quickly I noticed that the classic enviroments were simply gone, I couldn't find them anywhere. I got scared, but after some searching, I learned that they were turned off due to being incompatible. Apparently, many of the furniture, walls, and geometry were missing were missing or glitching, etc. I was relieved, thinking that, y'know, it was just a bug and it would be fixed at some point. It is a test channel after all. But now people are saying they'll not be coming back. Is that true? I really realy really REALLY hope not. They've very important to me, they help me relax, and I love changing them from time to time to break the routine, have something fresh and new. While the new backgrounds are cool, they're all the same, with just background changes.

Hello! My left controller is only 2 months old, no physical damages, or water damages and yet. Nothing. It won’t turn on or give any feedback from a fresh battery, or one that’s working in the right controller.when I try contacting support through the support options, it will not allow me to contact support at all. The website does not register my device to my account… Does anyone have any ideas on what to do, or know of an email or number to call to possibly bypass the annoying we sit to finally contact support?Thanks!

Bonjour.Des applications apparaissent dans la barre des tâches quand elles sont ouvertes.Elles disparaissent de la barre des tâches, remplacées par celles des fenêtres ouvertes (normal)PROBLÈME : JE NE RETROUVE PAS CES APPLICATIONS DANS BIBLIOTHÈQUE...Exemple: Quest Game Optimiser. Je ne le retrouve pas dans ma bibliothèque...Le seul moyen est de le réinstaller à partir de l' APK... À chaque fois...Où est le problème ?Merci

Hola. Estoy teniendo problemas con los juegos de realidad mixta. No me funciona el escáner automático de la habitación. Cuando pasa al manual, escanea el suelo perfectamente , pero cuando me dice que marque las esquinas de las paredes, no me detecta donde apuntó con los mandos. A alguien le ha pasado algo parecido o sabe cómo solucionarlo?

Every time i try too play a game it says that i need too connect even though i am connected too the wifi and im making the forum on my headset and i tried forgetting and reconnecting  and tried reseting ny router and tried factory resetting tried restarting but nothing works, if you have a possible fix please reply asap i want too play with my friends. 

Hello everybody im looking for a help with my quest link issue. Me and my friend are having the same problem. When I connect the headset to USB 3.0, it only starts charging and Windows does nothing, but when I connect it to USB 2.0, Windows recognizes it and makes a connection sound. The problem is that I don't want my image to look like it's from Minecraft, but rather to be beautiful via USB 3.0 (by the way, I updated the chipset drivers and tried all the USB 3.0 ports on the computer). I don't know if it could be because I have Windows 10. If you want some detailed information just ask me. Thank you for every answer.

Since the update to firmware 79, I was no longer able to connect my Quest 3s to my Windows PC. I used the same cable and tried two different PCs with identical settings. Sideloading was not possible without Windows connection. Nothing worked.The solution turned out to be very simple:I bought a new cable for the PC connection (USB 3.2 Gen 1).When connecting the Quest to the PC, I used to always press the notification “Allow USB connection.” Now you must not do this anymore. Just plug in the cable, and the Quest connects immediately.If you want to use the USB drive function, you should tap the message in the notification manager on the Quest, and a USB drive connection will be established.Just to complete the picture: I installed the ADB drivers both from the Meta website and from the Oculus package. I tried normal installation as well as installation in safe mode. I ran scripts from other posts that kill and restart the ADB server, ran the applications in admin mode, and tested differen

Hello, I am reaching out on behalf of one of our clients, who has reported the following:While running our application, their users may occasionally press the Meta button, which invokes the Meta UI and temporarily makes it so they cannot interact with our application until the Meta UI is closed out of. This part makes perfect sense.However, the issue is that they have reported difficulty in closing out the Meta UI and returning back to our application. Normally, users can either press the Meta button again (or press the 'Resume' button while the Meta UI is overlayed) to return back to the application. In our client's case, they state that they have to press the Meta button / press the 'Resume' button multiple times before the Meta UI finally responds to the action and closes out, returning to the application.In their troubleshooting, they could not find any consistent pattern that would indicate a condition that triggers this. For instance:They are using Quest 3 headsetsSome of th

Hi guys, I baught my vr about 2 months ago and ive been trying to find someone to play with. Is there any suggestions where to look? Im 22 if anyone around that age wants to play.

I have tried everything ,except buying original  cable from meta company,trying pcie USB card.why? Coz I was discouraged by the number of failed attempts and the lack of concrete solutions from metaquest support. On the forums, even these changes didn't always solve the problem; I usually read, "Use Wi-Fi. It's okay,but why do I see these ads like buy cable... isn't it just a scam? Why is this tolerated? 

Gddbc

Another title might be:Stuck on "choose profile" screen as my controllers are not recognized, after changing the batteries. update: it seems like after the last step I did to troubleshoot below where the latest software was updated onto my Meta 3, something changed with the functionality of being able to put tape over the sensor above the lenses, like between the eyebrows. I did this to keep the headset on particularly when I was putting it on and off my elderly parents when I could not cast, to assist them with their experience more quickly. This still works on my other M3 that has not had the newest software update pushed yet. Also, for what it's worth, I have a new pair of really chunky eyeglasses and when I put those on they also blocked the sensor in the same way the tape had, and I got the backlit gray screen. I really hope my rabbit hole helps somebody! meta, I implore you to please leave this post just in case it does. & for what it's worth, when I did successfull